Adds optional pod affinity so pods from the same project prefer
scheduling on the same node. This can help improve image cache hit
rates; subsequent pods benefit from already-pulled image layers,
reducing startup time.
Complements the built-in ImageLocality scheduler plugin by helping
during burst scheduling scenarios. Pod affinity sees scheduled pods
immediately, while ImageLocality only sees images after they're fully
pulled.
Configuration:
- `KUBERNETES_PROJECT_AFFINITY_ENABLED` - Enable/disable (default:
false)
- `KUBERNETES_PROJECT_AFFINITY_WEIGHT` - Scheduler weight 1-100
(default: 50)
- `KUBERNETES_PROJECT_AFFINITY_TOPOLOGY_KEY` - Topology key (default:
kubernetes.io/hostname)
Uses soft (preferred) affinity so pods always schedule even if preferred
node is full.
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2995">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
## Summary
- When a child process crashes and a retry (`RETRY_IMMEDIATELY`) is
attempted on the same `TaskRunProcess`, `execute()` hangs forever
because the IPC send is silently skipped and the attempt promise can
never resolve
- This caused runner pods to stay up indefinitely with no heartbeats or
polls
- Fix: reject the attempt promise immediately when the child is not
connected, so the controller can proceed to warm start or exit
## Test plan
- [x] Added `taskRunProcess.test.ts` — verifies `execute()` rejects
promptly instead of hanging when the child process is dead
- [x] Deploy and verify no more stuck runner pods accumulate over time
Closes#2798
When a run finished the logs UI could get stuck and so be pending and
never update again. If you did a hard reload it would be correct.
This happened because when we insert a log/span we ping Redis which
causes a reload of the UI. However there was a race condition – the
insert into ClickHouse can take a while so we were refreshing the UI too
early. Then never refreshing it again.
Changes
- Send refresh pings every 5s to keep run page logs live
- Throttle updates so the run UI is never updated more than once per
second
- Stop auto-reloading when a run has been completed for >= 30s
- Add type inference improvements for the throttle function
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2971">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
## ✅ Checklist
- [ ] I have followed every step in the [contributing
guide](https://github.com/triggerdotdev/trigger.dev/blob/main/CONTRIBUTING.md)
- [ ] The PR title follows the convention.
- [ ] I ran and tested the code works
---
## Description
This PR standardizes the `@types/node` dependency across the entire
monorepo to version `20.14.14`. Previously, different packages were
using different versions (ranging from 12.20.55 to 22.13.9), which could
cause type conflicts and inconsistencies.
### Changes Made
1. **tsconfig.json** - Added `"node"` to the `types` array in
`apps/webapp/tsconfig.json` to ensure Node.js types are properly
recognized
2. **package.json overrides** - Added `@types/node` version override to
`20.14.14` in the root `package.json`
3. **pnpm-lock.yaml** - Updated lock file to reflect the standardized
version across all packages and their dependencies
4. **Fixture package.json** - Updated
`packages/cli-v3/e2e/fixtures/emit-decorator-metadata/package.json` to
use the standardized version
This ensures consistent type definitions across the monorepo and
prevents version mismatches that could lead to type errors or unexpected
behavior.
---
## Testing
- Verified that all package references to `@types/node` now point to
version `20.14.14`
- Confirmed that the lock file properly reflects the override across all
transitive dependencies
- Ensured TypeScript configuration includes Node.js types for proper
type checking
---
## Changelog
- Standardized `@types/node` to version `20.14.14` across all packages
in the monorepo
- Added `"node"` to TypeScript compiler types in webapp configuration
- Updated all package dependencies to use the consistent version through
pnpm overrides
💯https://claude.ai/code/session_018eqp2LvvErkFSN9oK5xBh1
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2970">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Eric Allam <ericallam@users.noreply.github.com>
Bundle superjson and its dependency (copy-anything) during build to
avoid
ERR_REQUIRE_ESM errors on Node.js versions that don't support
require(ESM)
by default (< 22.12.0) and AWS Lambda which intentionally disables it.
- Add scripts/bundle-superjson.mjs to bundle superjson with esbuild
- Update build script to bundle vendor files before tshy compilation
- Move superjson from dependencies to devDependencies
- Update imports to use vendored bundles
Fixes#2937
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2949">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
---------
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Eric Allam <ericallam@users.noreply.github.com>
Summary
- Query: add time limits, performance improvements, and styling updates
Changes
- Add ClickHouse output_text and error_text columns with indexes
- Automatically use _text columns for JSON based on query pattern;
support JSON column data prefixes
- Add idempotency key and scope columns
- Add enforcedWhereClause for tenant and time restrictions, instead of
the old tenant stuff.
- Implement basic time filter limiting and set default time period based
on plan; show message when results are clipped
- UX: resizable code area (including vertical splits), collapsible
sidebar, fix table/chart vertical sizing, max height for chart legend in
fullscreen
- Styling and UI tweaks: improved chart legend styling, more chart
colours, thinner line chart stroke, pricing callout color, improved
layout for callouts
- Features: generate and save AI titles
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2953">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
Closes #
## ✅ Checklist
- [ ] I have followed every step in the [contributing
guide](https://github.com/triggerdotdev/trigger.dev/blob/main/CONTRIBUTING.md)
- [ ] The PR title follows the convention.
- [ ] I ran and tested the code works
---
## Testing
Tested the MiddleTruncate component in the TasksDropdown by:
1. Verifying that long task names (e.g.,
"namespace:category:subcategory:task-name") are truncated in the middle
2. Confirming the full text appears in a tooltip on hover
3. Testing responsive behavior - truncation adjusts when the container
is resized
4. Verifying that short task names that fit within the container are
displayed in full without truncation
---
## Changelog
Added a new `MiddleTruncate` primitive component that intelligently
truncates text in the middle while preserving the beginning and end
portions. This is particularly useful for long hierarchical identifiers
like task slugs.
**Key features:**
- Truncates text in the middle with an ellipsis (…) when it exceeds
available width
- Shows full text in a tooltip on hover when truncated
- Responsive - recalculates truncation on container resize using
ResizeObserver
- Maintains minimum character visibility (4 chars minimum on each side
for readability)
- Integrated into TasksDropdown to handle long task names
**Changes:**
- Created new `MiddleTruncate.tsx` component with binary search
algorithm for optimal character distribution
- Updated TasksDropdown to use MiddleTruncate for task slug display
- Increased TasksDropdown popover width from 240px to 360px to provide
better space for truncated text
---
## Screenshots
💯https://github.com/user-attachments/assets/a7a2191a-2e36-437e-ab3f-517fe7620b93
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2946">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
---------
Co-authored-by: Claude <noreply@anthropic.com>
## ✨ Changes
### UI & UX
- Normalized log level display across table and detail view
- Fixed table header scroll behavior and sidebar positioning
- Improved loading state with taller segment and disabled resizing
- Added "no more logs" message with count
- Enhanced keyboard shortcuts
### Filtering & Search
- Streamlined filters: RunId and Task only (removed run filters)
- Side panel closes when filters change
- Fixed logs from previous search remaining in table
- Fixed table scroll position when changing filters
### Backend
- Added performance indexes on message and attributes
(`014_add_task_runs_v2_search_indexes.sql`)
- Added DEBUG level logging by default
- Removed internal logs from display
- Fixed ServiceValidationError forwarding to frontend
- Removed v1 logs API support
## Summary
Fixes#2856 - The `onComplete` callback in `useRealtimeRun` was firing prematurely
## Root Cause
The callback was triggered when the long-poll stream ended, regardless
of whether the run had actually completed. Reverse proxies often close
idle connections, causing the stream to end prematurely. In this case it
was caused by fetch abort due to React strict mode.
## Fix
Changed the condition from checking if `run` exists to checking if
`run?.finishedAt` exists, ensuring `onComplete` only fires when the run
has reached a terminal state.
---------
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: nicktrn <nicktrn@users.noreply.github.com>
## Summary
Fixes a concurrency leak in the batch queue where visibility timeout
reclaims do not release concurrency slots.
**The bug:** When a message visibility timeout expires (60s),
`reclaimTimedOut` puts the message back in the queue but does NOT
release the concurrency slot. The messageId stays in the concurrency set
(`engine:batch:concurrency:tenant:{envId}`), counting against the tenant
limit even though the message is no longer in-flight.
This causes:
1. Tenant appears at capacity when checking `SCARD >= limit`
2. New messages get released back to queue instead of being processed
3. Messages stuck in infinite loop, master queue grows indefinitely
**The fix:**
- Modified `reclaimTimedOut` to capture message data (including
tenantId) BEFORE releasing from in-flight
- Returns `ReclaimedMessageInfo[]` with messageId, queueId, tenantId,
and metadata
- `#reclaimTimedOutMessages` now iterates over reclaimed messages and
calls `concurrencyManager.release()` for each
## Test plan
- [x] Added test: `should return reclaimed message info with tenantId
for concurrency release`
- [x] Added test: `should return empty array when no messages have timed
out`
- [x] Added test: `should reclaim multiple timed-out messages and return
all their info`
- [x] Updated `raceConditions.test.ts` for new return type
- [x] All tests passing
- [ ] Monitor production after deploy for concurrency leak recurrence
refs TRI-7049
<!-- devin-review-badge-begin -->
---
<a
href="https://app.devin.ai/review/triggerdotdev/trigger.dev/pull/2907">
<picture>
<source media="(prefers-color-scheme: dark)"
srcset="https://static.devin.ai/assets/gh-open-in-devin-review-dark.svg?v=1">
<img
src="https://static.devin.ai/assets/gh-open-in-devin-review-light.svg?v=1"
alt="Open with Devin">
</picture>
</a>
<!-- devin-review-badge-end -->
Adds documentation for creating additional worker groups via the admin
API endpoint, including how to make users admin (new vs existing users),
and clarifies that ADMIN_EMAILS only applies on signup.
Adds documentation notes clarifying that:
- delayed runs execute on the current deployment version
- guidance for Date objects in payloads
- static IP availability
- version locking behavior for delayed runs
This PR was opened by the [Changesets
release](https://github.com/changesets/action) GitHub action. When
you're ready to do a release, you can merge this and publish to npm
yourself or [setup this action to publish
automatically](https://github.com/changesets/action#with-publishing). If
you're not ready to do a release yet, that's fine, whenever you add more
changesets to main, this PR will be updated.
# Releases
## @trigger.dev/build@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
## trigger.dev@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
- `@trigger.dev/build@4.3.3`
- `@trigger.dev/schema-to-json@4.3.3`
## @trigger.dev/core@4.3.3
### Patch Changes
- Add support for AI SDK v6 (Vercel AI SDK)
([#2919](https://github.com/triggerdotdev/trigger.dev/pull/2919))
- Updated peer dependency to allow `ai@^6.0.0` alongside v4 and v5
- Updated internal code to handle async validation from AI SDK v6's
Schema type
- Expose user-provided idempotency key and scope in task context.
`ctx.run.idempotencyKey` now returns the original key passed to
`idempotencyKeys.create()` instead of the hash, and
`ctx.run.idempotencyKeyScope` shows the scope ("run", "attempt", or
"global").
([#2903](https://github.com/triggerdotdev/trigger.dev/pull/2903))
- Fix batch trigger failing with "ReadableStream is locked" error when
network failures occur mid-stream. Added safe stream cancellation that
gracefully handles locked streams during retry attempts.
([#2917](https://github.com/triggerdotdev/trigger.dev/pull/2917))
- Add a maxDepth to flatten/unflattenAttributes to prevent possible
issues ([#2890](https://github.com/triggerdotdev/trigger.dev/pull/2890))
## @trigger.dev/python@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/sdk@4.3.3`
- `@trigger.dev/core@4.3.3`
- `@trigger.dev/build@4.3.3`
## @trigger.dev/react-hooks@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
## @trigger.dev/redis-worker@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
## @trigger.dev/rsc@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
## @trigger.dev/schema-to-json@4.3.3
### Patch Changes
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
## @trigger.dev/sdk@4.3.3
### Patch Changes
- Add support for AI SDK v6 (Vercel AI SDK)
([#2919](https://github.com/triggerdotdev/trigger.dev/pull/2919))
- Updated peer dependency to allow `ai@^6.0.0` alongside v4 and v5
- Updated internal code to handle async validation from AI SDK v6's
Schema type
- Expose user-provided idempotency key and scope in task context.
`ctx.run.idempotencyKey` now returns the original key passed to
`idempotencyKeys.create()` instead of the hash, and
`ctx.run.idempotencyKeyScope` shows the scope ("run", "attempt", or
"global").
([#2903](https://github.com/triggerdotdev/trigger.dev/pull/2903))
- Updated dependencies:
- `@trigger.dev/core@4.3.3`
---------
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
There’s an edge case that means runs can end up in the
currentConcurrency set when they’re not in the correct state for
execution. This means they will be permanently stuck in queued.
Given an environmentId this will fix those runs.
This is a temporary fix while we permanently fix the issue.
---------
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Eric Allam <ericallam@users.noreply.github.com>
When we auth API keys we get the environment, project and org. This is a
very hot path so even though these queries are fast they contribute a
significant percentage of total load.
This moves them to use the read replica instead.
Moving usage updates into the run engine to prevent inefficient &
additional incremental updates to the TaskRun table. Read/Modify/Write
pattern is safe inside of the run engine because of the run lock. We can
also now cap the usageDurationMs value from overflowing and causing an
error.
## Why?
This is preventing at least one update per TaskRun and instead updating
these values piggybacking on other updates.
## Aurora PostgreSQL Reader Consistency Notes
### TL;DR
Aurora readers share the same storage as the writer, but maintain
separate in-memory page caches. This means:
- **Storage is always consistent** - writes are synchronously committed
to shared storage
- **Page cache can lag** - typically <100ms, but can cause stale reads
if data is cached
### How It Works
1. Writer commits to shared storage (synchronous 4/6 quorum)
2. Writer sends cache invalidation messages to readers (asynchronous)
3. If reader has data in cache → returns cached (potentially stale)
value
4. If reader has cache miss → fetches from shared storage (always
current)
### Monitoring
```sql
SELECT server_id,
CASE WHEN session_id = 'MASTER_SESSION_ID' THEN 'Writer' ELSE 'Reader' END AS role,
replica_lag_in_msec
FROM aurora_replica_status();
```
Move expensive findMany queries for PENDING_VERSION and
WAITING_FOR_DEPLOY
runs to read replicas to avoid blocking migrations on the primary
database.
Changes:
- Add readOnlyPrisma to SystemResources type
- Pass readOnlyPrisma to systems in RunEngine constructor
- Update pendingVersionSystem to use readOnlyPrisma for findMany
- Update executeTasksWaitingForDeploy to use _replica for findMany
## Summary
- Adds `IF NOT EXISTS` to the migration that adds
`idempotencyKeyOptions` column to prevent errors if the column already
exists
## Migration Checksum Fix
If you've already applied the previous version of this migration, you'll
need to update the checksum in your `_prisma_migrations` table to match
the new migration file.
**Previous checksum:**
`f8876e274e3f7735312275eb24a9c4b40f512ac12a286b2de3add47f66df5b27`
**New checksum:**
`0620a914ddbaf01279576274432e51c41f41502cd4c8de38621625380750e397`
### Fix instructions
Run this SQL command against your database:
```sql
UPDATE "_prisma_migrations"
SET checksum = '0620a914ddbaf01279576274432e51c41f41502cd4c8de38621625380750e397'
WHERE migration_name = '20260116154810_add_idempotency_key_options_to_task_run';
```
This updates the stored checksum to match the modified migration file,
allowing future migrations to proceed without checksum mismatch errors.
## Test plan
- [x] Verified migration applies cleanly on fresh database
- [ ] Verified checksum update works on database with previous migration
applied
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Adds support for skipping Postgres migrations on container startup via
the new `SKIP_POSTGRES_MIGRATIONS` environment variable.
Set `SKIP_POSTGRES_MIGRATIONS=1` to skip migrations, matching the
existing behavior of `SKIP_CLICKHOUSE_MIGRATIONS`.
What changed
- Upgraded recharts to 2.15.2
- Added multiple chart types and components: big number, line, stacked,
bar (including zoomable & reference line), big dataset bar, and usage
graph
- Implemented custom legend with animated values, tooltip showing x-axis
data, and hover/highlight behaviors for stacks and legend
- Added loading, no-data, and invalid chart states plus loading spinners
and improved loading animations/layout
- Storybook integration: initial charts setup, separate chart files,
alphabetized menu, chart state toggles, and story updates
- Interaction & UX improvements: zooming (drag/select), crosshair
pointer, show/select dates while zooming, prevent text selection on
drag, hide mouse wheel zoom, capped legend items, axis/legend styling
tweaks, better spacing, and min-height for charts
- Data & state handling: moved date data to route for unified zooming,
moved chartState to main Chart component, moved hard-coded/mock data out
of components, and set chart data when zooming to start/end dates
- Performance & animation: turned off/reduced chart animations, sped up
animated numbers, removed hover transitions for bars
- New UI primitives and layout: Card component, small card updates, SVG
icons, improved segmented control and popover variants, table
improvements (resizable columns, filtering, sorting, scrolling fixes)
- Various fixes and polish: tooltip style fixes, legend value updates,
hover/leave state resets, bar width fixes for small datasets,
type/import fixes, and numerous small style/typo tweaks
---------
Co-authored-by: James Ritchie <james@trigger.dev>
## Summary
- Add support for Vercel AI SDK v6 as a peer dependency
- Update internal code to handle async validation from AI SDK v6's
Schema type
Closes#2918
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Eric Allam <ericallam@users.noreply.github.com>
When fetch crashes mid-stream during batch item upload (e.g., connection
reset, timeout), the request stream may remain locked by fetch's
internal reader. Attempting to cancel a locked stream throws 'Invalid
state: ReadableStream is locked', causing the batch operation to fail.
Added safeStreamCancel() helper that gracefully handles locked streams
by catching and ignoring the locked error. The stream will be cleaned up
by garbage collection when fetch eventually releases the reader.
Fixes customer issue where batchTrigger failed with ReadableStream
locked error during network instability.
Iss
