* Upgrade posthog-node to clear axios vulns
* Upgrade @slack/web-api to use a secure version of axios
* Update parse-duration to fix security vulns
* Mitigate against the ws DoS vuln
* Upgrade body-parser to 1.20.3 in the webapp
* Upgrade react-use to 17.5.1 to remove the fast-loops transitive dep
* Remove unused babel dev deps and config file that's no longer used
* Upgrade prismjs to 1.30.0 and bundle parse-duration now
* upgrade express to 4.20.0 to fix issue with XSS when redirecting
* Upgrade @conform/zod to 0.9.2
* bump worker version
* Suggested glossary for the RunEngine, TBC
* Removed BatchTaskRun changes from this branch, they were done in main
* Set the BatchTaskRun status to completed when all runs are completed
* When dequeuing respect passed in maxResources
* Ported over the new run props: idempotencyKeyExpiresAt, versions, oneTimeUseToken, maxDurationInSeconds
* Didn’t hit save… the new props when triggering tasks passed through
* Idempotency expiration + waitpoint edge case
* WIP on creating checkpoint, parking for now
* fix worker routes
* upgrade webapp node types to support generic event emitter
* separate event bus handler singleton and run failure alerts
* duration waits
* fix execution snapshot debug spans
* task waits
* fix event bus types
* temporary fix for react hook run handle type
* disable run notifications for now
* convert any typecasts to expect errors to more easily fix later
* fix webapp types after node types upgrade
* updateEnvConcurrencyLimits across marqs and the runqueue
* Pass proper values into the run engine
* RunQueue settings and removed unused rebalancing workers
* Remove rebalancing prop
* Tidied more things up
* Update/remove queue limits for MARQS and RunQueue
* taskQueue/concurrencyLimit changes ported back into the RunEngine
* Reworked completing waitpoints to improve performance and reduce race conditions
* Improved test robustness
* Down to a single run lock only when a run is totally unblocked and ready to continue
* warm starts, worker notifications, wait fixes
* Fix for Run Engine poll interval env var
* Expect the waitpoint to be completed quickly
* If a run is locked then it’s too late to expire it
* Added VALKEY_ env vars and plugged them into the run engine
* Extracted and updated the guard queue function so it can be used when batching
* Added logging and universal concurrency changes to trigger task v1
* Added notes back in
* Bump @trigger.dev/worker to 3.3.7
* reportInvocationUsage for the runAttemptStarted event
* improve execution snapshot span debug span start times
* Unfriendly IDs
* update lockfile
* Created a shared determineEngineVersion function
* disable unfinished commands
* save new cli config to different location, misc fixes
* add basic engine version check via current deploy
* new run engine will default to node 22 runtime
* block some actions for projects on previous run engine
* fix worker group tests
* fix triggerAndWait test
* one typescript version to rule them all
* redlock type patch
* fix type issues caused by ts-reset
* improve cleanup scripts
* add missing socket.io dep
* fix run notification handler type
* fix worker group test again
* generate prisma client for e2e tests
* remove worker group tests for now
* prevent image pull rate limits during unit tests
* increase timeout for queue concurrency limit test
* generate prisma client for preview release
* same node types everywhere
* Updated engine readme, removed legacy system notes
* use default machine preset from platform package
* worker instances plural in schema
* disable pnpm update notifications
* return worker group details from connect call
* add workers admin route
* fix heartbeat route return type
* move deployment labels to core apps
* refactor run controller env schema
* Add firstAttemptStartedAt to TaskRun
* RunEngine 2.0 batch trigger support (#1581)
* Make it clear when BatchTriggerV2Service is used
* Copy of BatchTriggerV2Service
* WIP batch triggering
* Allow blocking a run with multiple waitpoints at once. Made it atomic
* Removed unused param
* New batch service
* Pass through the parentRunId and resumeParentOnCompletion
* Use the new batch service, and correct trigger task version
* Force V1 engine if using BatchTriggerV2Service, we’ve already done the check at this point
* Removed the $transaction and early exit if nothing changed
* Adedd a simple batch task to the hello world reference catalog
* Fix for batch waits not working
* Added parentRunId in a couple more places
* Removed waitForBatch log
* Added another parentRunId
* Expanded the example to include all the different triggers
* More changes to blocking to support continuing after idempotent completed runs
* Fix for the wrong type when blocking a run
* remove @map
* optimise worker auth query
* add engine version header to core api client requests
* remove unique constraint for default group id
* consolidate migrations
* the first managed worker becomes the global default
* Debug events off by default, added an admin toggle to show them
* worker group name can't be an empty string
* add exec helper to core
* move machine resources to core
* add pre-dequeue callback to determine max resources
* optionally skip dequeue
* bump worker package
* move worker to core
* fix ReadableStream type error
* fix another type issue
* update a few more tsconfigs
* add metadata changes introduced in #1563
* Run Engine 2.0 trigger idempotency (#1613)
* Return isCached from the trigger API endpoint
* Fix for the wrong type when blocking a run
* Render the idempotent run in the inspector
* Event repository for idempotency
* Debug events off by default, added an admin toggle to show them
* triggerAndWait idempotency span
* Some improvements to the reference idempotency task
* Removed the cached tracing from the SDK
* Server-side creating cached span
* Improved idempotency test task
* Create cached task spans in a better way
* Idempotency span support inc batch trigger
* Simplified how the spans are done, using more of the existing code
* Improved the idempotency test task
* Added Waitpoint Batch type, add to TaskRunWaitpoint with order
* Pass batch ids through to the run engine when triggering
* Added batchIndex
* Better batch support in the run engine
* Added settings to batch trigger service, before major overhaul
* Allow the longer run/batch ids in the filters
* Changed how batching works, includes breaking changes in CLI
* Removed batch idempotency because it gets put on the runs instead
* Added `runs` to the batch.retrieve call/API
* Set firstAttemptStartedAt when creating the first attempt
* Do nothing when receiving a BATCH waitpoint
* Some fixes in the new batch trigger service… mostly just passing missing optional params through
* Tweaked the idempotency test task for more situations
* Only block with a batch if it’s a batchTriggerAndWait… 🤦♂️
* Added another case to the idempotency test task: multiple of the same idempotencyKey in a single batch
* Support for the same run multiple times in the same batch
* Small tweaks
* Make sure to complete batches, even if they’re not andWait ones
* Export RunDuplicateIdempotencyKeyError from the run engine
* Latest lockfile
* Trigger with a machine (old run engine)
* RE2, allow setting machine when triggering
* Fix for new glob patterns
* add max run count to dequeue from version route
* add worker instance name env var and header
* queue consumer pre skip callback
* poll for more runs after final execution errors
* fix dequeue search param schema
* add shortcut to debug switch
* expose run engine timeouts as env vars
* make warm start durations configurable
* add optional status to json reply helper
* fix preSkip hook, add debug logs
* BLOCKED_BY_WAITPOINTS -> SUSPENDED
* exit controller when run suspended
* check if already replied before http reply
* run controller will wait for next run after the current one is suspended
* cancel run button shortcut
* minimal event repository environment type
* fix update metadata call
* run suspension and misc fixes wip
* change debug shortcut to shift + D
* Started work on the Dev supervisor
* Formatting
* Fix for bad imports
* Before rebuilding SSE
* Presence updating from the CLI working via SSE
* add worker notification debug logs
* send run:stop when exiting run phase
* skip current snapshot poll on worker notification
* add more logs and route to submit run debug logs
* add worker and runner ids to snapshots
* improve run notification debug logs
* add workload debug log route
* misc run controller fixes and refactor
* prevent parallel execution of critical functions
* update bun to 1.2.1
* WIP with dev dequeuing
* Method to convert friendlyIds to non-friendly, do nothing with actual ids
* Set the engine on BackgroundWorker, lazily upgrade projects to engine V2
* Runs with ttls were getting immediately expired… oops.
* Pass the Waiting for deploy reason through, so we have it on the execution snapshots
* Fixed the logic for getting the right background worker for a run
* Use the correct ID when dequeuing…
* determineEngineVersion is now fully functional
* Rate limiter ignores the dev endpoints
* Retrieving a batch gives you the runIds
* Set a unique version for the RE2 BatchTaskRun
* add provisional changeset
* The start of dev run execution is working
* First dev run working
* Moved the dev run controller closer to what Nick did with the managed one
* export exec output type
* Heartbeat fix: don’t heartbeat if _isHeartbeating == false
* Dev runs get notifications, some dev bug fixes
* Improved logging or dequeuing
* We need to dequeue runs from the latest version too, for triggerAndWait
* Ported Eric’s validateWorkerManifest with nicer errors
* When flattening an idempotency key if part is undefined, return undefined
* Dev logging fixes
* Remove sigterm listener
* Deprecating workers. Don’t specify a BackgroundWorker when dequeuing an environment
* Deleted some old files. Renamed “managed” to “deploy”
* When a build finishes, always copy the build dir (otherwise the first one gets trampled on by the 2nd)
* Dev master queues should work differently
* Deleting old workers
* Added debounce function to core
* Improvement to canceling
* WIP on debounce canceling on socket disconnection
* Added environment data to execution snapshots
* Dev runs that have stalled get “Canceled” with a reason explaining why
* Show CLI messaged when a connection to the platform is lost/restored
* Fix TriggerTask after merge
* Add trigger task v2 max attempts, replace some findUniques
* Port the new queue logic to the run engine
* More fixes post-merge
* We weren’t setting a `retryConfig` up for the tests… it’s now required
* Start the Redis worker inside the Run Engine… 🤦♂️
* Trying to make the testcontainers more reliable
* Added keyPrefix: "engine:”
* Badly placed bracket in trigger task
* Better Redis namespacing
* Fix for expired run not getting removed from the queue
* Don’t create a redis client in the testcontainers, return the redisOptions instead
* Cleanup redis client in the run lock tests
* Fix for the RunQueue not supporting keyPrefix
* Updated more of the RunQueue scripts rebalancing
* Trying to make Redis more robust in the tests…
* Improved test resiliciency more
* Fix for delays (checkpoint check)
* Increase the timeout slightly to fix ttl test
* Added priority support when triggering
* More wip trying to make test containers more reliable
* batchTriggerAndWait test is still failing… some wip to try fix it
* Fixed redis tests now we’re not providing a client
* Separate Redis clients for the run engine worker/queue/runlock
* Made the wait for duration test more resilient
* Added idempotencyKeyExpiresAt to Waitpoints
* Waitpoint timeouts and idempotency expiry
* Use finishWaitpoint, removed extra worker job
* Added waitpoint idempotency tests
* Creating resume tokens is working
* Some improvements to the resume tokens
* Moved resumeTokens to just be wait functions 🥳
* Delete old RuntimeManagers
* Wait for token is working
* Better test for the wait tokens
* Improved the test task some more
* Hide the accessories in the span inspector
* WIP on waitpoint inspector
* WIP on complete waitpoint form
* Span overview panel can be changed based on the entity type
* Improved the waitpoint display
* WIP on completing waitpoint form
* Use the existing CodeBlock for the tip
* Style improvements
* Complete waitpoint
* All waitpoint sidebar variants
* Waits now use a pause icon
* Durations waits use the API to create/block with a waitpoint, not the runtime
* Fix for engine.blockRunWithWaitpoint required org id
* Removed old wait code from the run controllers/task run process
* Form action for skipping a datetime waitpoint
* Move testDockerCheckpoint to a separate core package export (it can’t be bundled on the client)
* Fix for glitchy hourglass animation
* Completed waitpoints display better
* Increase Redis maxRetriesPerRequest to 20 (default)
* Completing and skipping waitpoints is working
* Remove the database prisma dev command, since we need to use create only now. Updated docs
* Added skip timeout, reworked the UI
* Tweaked spacing
* Added payload limit to waitpoint token completion from dashboard
* Test idempotency works on wait.for and wait.until
* Moved the worker-actions to /engine/ from /api/
* Moved dev engine endpoints to /engine/ from /api/
* Separate /engine/ rate limiter
* Added parallel wait prevention, it’s working for duration waits but not well for triggerAndWait yet
* WIP post-merge conflicts
* Set taskEventStore column in the new engine
* Remove duplicate keys
* Post-merge fixes
* Fix for span merge layout
* Use executedAt instead of firstAttemptStartedAt
---------
Co-authored-by: Matt Aitken <matt@mattaitken.com>
* Fix streaming splits in realtime streams v2
* Add changeset
* Skip all flaky tests 😡
* Improve the way we stream from tasks to the server
* Improve the v1 realtime streams (Redis)
* Turn on the relay realtime stream service
* Improved the relay realtime cleanup
* Fixed consuming realtime runs w/streams after the run is already finished
* Remove some logs
* Update changeset
* Fixed runStream tests
* WIP realtime streams
* Handle realtime with large payloads or outputs #1451
* feat: optimize Redis stream handling with batching
Add STREAM_ORIGIN to environment schema. Improve performance in
RealtimeStreams by using TextDecoderStream for simpler text
decoding and implementing batching of XADD commands for Redis
streams. Limit stream size using MAXLEN option. Update
environment variable repository with new variable type. Adjust
import statements for Redis key and value types.
* 🔧 chore: add dev dependencies for bundle analysis
* add metadata tests and a few more utilties
* Add stream tests and improve streaming
* Added AI tool tasks, descriptions to tasks
* Use the config file path to determine the workingDir, then the package.json path
* Remove stream test files
* useTaskTrigger react hook that allows triggering a task from the client
* Add streaming support for the realtime react hooks
* Add ability to stream results after useTaskTrigger
* Improve the stream throttling
* Use the runId as the ID key to bust the cache after triggering
* Upgrade to to the latest electric sql client and server
* Make realtime server backwards compat with 3.1.2 release
* Pass the runId into useRealtimeRun
* Fix scopes when specifiying reading all runs
* WIP @trigger.dev/rsc package
* Various fixes and accepted recommendations by CodeRabbit
* Regenerate pnpm lock file
* A couple tweaks to rsc and give up on rendering react in tasks for now
* Add changeset
* Remove triggerRequest from the useEffect deps
* Improve realtime & frontend authentication errors
* Fixed authorization tests
* Remove unnecessary log
* Add metadata.stream limits and improve the metadata streams structure
* Streams can now have up to 2500 entries
* Various coderabbit fixes
* additional react-hooks jsdocs
* Denormalize run tags, increase character limit to 128
* WIP realtime subscribing to runs
* extracted the stream stuff into core, made it more reusable
* WIP tags
* Remove tags for now because it’s not support in electric
* Support async iterables, readable stream, and callback style subscription styles
* Remove tags streaming endpoint
* Add realtime rate limits and scope them to the /realtime path
* WIP rate limt per org
* Introduce per org rate limits
* WIP JWT auth
* Move migrations into new internal db package
* Resolve pnpm lock file
* Authenticating to the realtime API with JWTs are working
* realtime in the client
* Created react-hooks package and starting to move stuff in there
* Improve types for hooks
* schema tasks
* Added useBatch hook
* build uploadthing/fal demo and change how run metadata is synced to the server
* tweaks
* WIL realtime concurrency tracking
* Implement test for realtime client using testcontainers
also updated electric to latest version
* Allow customizing the expiration time of the automatic JWT created after triggering a task
* Add support for subscribing to run tags
* Improve auth types and API
* finalize the realtime API
* Fixed some example stuff
* Allow up to 10 run tags
* Remove core from docker-provider tsconfig paths to prevent it from being typechecked
* do the same for the kubernetes provider
* Fixing some typecheck errors
* Fix webapp type errors
* Update @trigger.dev/platform to 1.0.13
* Fix attw error
* Remove from/to in subscribeToRuns query params
* Add tests for the rate limit middleware and add custom JWT rate limits
* turn off webapp test parallelism
* Finish renaming jwt -> publicAccessToken and automatically give the JWT read access to the tags when using trigger
* Add changeset
* Attempt to fix unit tests in CI
* Skip running the auth rate limit middleware tests for now
* Try a beefier machine
* Try and run webapp tests separately
* Setup env vars
* Make sliding window test more reliabile
* v3: cancel subtasks when parent task runs are cancelled
* v3: recover from server rate limiting errors in a more reliable way
- Changing from sliding window to token bucket in the API rate limiter, to help smooth out traffic
- Adding spans to the API Client core & SDK functions
- Added waiting spans when retrying in the API Client
- Retrying in the API Client now respects the x-ratelimit-reset
- Retrying ApiError’s in tasks now respects the x-ratelimit-reset
- Added AbortTaskRunError that when thrown will stop retries
- Added idempotency keys SDK functions and automatically injecting the run ID when inside a task
- Added the ability to configure ApiRequestOptions (retries only for now) globally and on specific calls
- Implement the maxAttempts TaskRunOption (it wasn’t doing anything before)
* Adding some docs about the request options
* Fix type error
* Remove context propagation through graphile jobs
* Remove logger
* only select a subset of task run columns
* limit columns selected in batchTrigger as well
* added idempotency doc
* allow scoped idempotency keys, and fixed an issue with the unique index on BatchTaskRun and TaskRun
* Removed old cancel task run children code
* Trying to use the @upstash/ratelimit package with ioredis…
* WIP using the redis package instead
* Revert the action back
* Removed redis
* Started refactoring
* SQS setting for the poll interval. Set the default queue reading to be slower
* API rate limiter as Express middleware
* Organise imports
* Fixed spelling mistake “limitter”
* No authorization header response is problem+json
* WIP proxy/deploy
* WIP, registry proxy in express working
* A couple of notes, preparing for indexing
* Move the changes to prod-worker into the new file
* Deploy command working with indexing and runs (docker provider only for now)
* Removed ts-expect-error directive
* Fixed build command
* Downgrade to remix-auth-email-link to remove yarn dependency
* Turn off the pg listen service for now
* Add snapshot admin route
* A couple logger fixes
* Add ability to disable compression
* Add ability to disable SSE
* Fix SSE memory leak + DB load issue
* Implement manually invokable jobs through the invokeTrigger
Also implemented a job run notification system, that will POST details of a run on completion. This combines with the task callbackUrl system to implement the invokeAndWait
* Document the invoke trigger
* batch invoke and wait
* background fetch timeouts
* Use @whatwg-node/fetch instead of the polyfilled fetch
* Fix some outdated dependencies in webapp
* Improved subtask error propogation messages
* Document the OpenAI changes and the batch invoke stuff
* Fix dequeuing jobs
* Don’t retry the OpenAI completion background task
* Added OpenAI changesets
* Use the new ResumeTaskService in ProcessCallbackTimeout as well
* Auto-yield run execution to help prevent duplicate task executions
* Add auto-yield config to endpoints
* Refactor run execution with buffer and limits
Introduced constants RUN_CHUNK_EXECUTION_BUFFER and MAX_RUN_CHUNK_EXECUTION_LIMIT. Adjusted PerformRunExecutionV2Service to use the new constants to fine-tune execution timings and buffers.
* Add endpoint probing functionality
Added new `RESPONSE_TIMEOUT_STATUS_CODES` in `consts.ts` to manage timeout responses. Additional functions `detectResponseIsTimeout(response: Response)` was added in `endpoint.server.ts` to detect if a response was a timeout based on the status codes from `RESPONSE_TIMEOUT_STATUS_CODES`.
Update actions to use new endpoint probing endpoint service. This allows for the early probing of endpoints to determine if they're up and running.
A new class `ProbeEndpointService` was created in `probeEndpoint.server.ts` which makes HTTP requests to a given endpoint and updates its properties based on the result.
Finally, `detectResponseIsTimeout(response)` is used in `performRunExecutionV2.server.ts` for marking the execution as succeeded when facing a timeout.
* Refactored probe method in EndpointApi class
The probe method of the EndpointApi class has been refactored to remove the error handling part and it now takes a timeout sent from the client directly. The corresponding changes were also made in the ProbeEndpointService and TriggerClient objects to reflect the alterations in the probe method.
The error handling related to the timeout has been removed and the responsibility of handling the timeout has been shifted to the client. Thus, the probe method has been greatly simplified. The `probeEndpoint.server.ts` file was also changed to accommodate the change in behavior of the probe result.
In the `triggerClient.ts` the timeout for probe is now read from the incoming request object. For backward compatibility, if no timeout is provided in the request, the default value of 15 minutes is used.
* Remove performRunExecution v1 enqueue function
* Better document limits and add docs on increasing function timeouts
* Upgrade webapp docker container to use 18.18.2
* force clients to yield when a run is executing in a gracefully shutting down worker
* Renamed task `key` to `cacheKey` and added more task documentation
* Index the `@trigger.dev/sdk` version on Endpoints
* WIP
* Report ECS task info on startup and shutdown
* Fixed lifecycle name
* Re-add terminus
* Require the build dir when http server is disabled
* Remove unnecessary logs
* Implement graceful shutdown in ZodWorker
* Re-order some code
* Increase the keepAliveTimeout to 65 seconds to prevent LB 502 errors
* WIP job run performance improvements
- Added a `perf` tool to better measure job run performance under heavy load
- Removed `runFinished` job (not really needed)
- startQueuedRuns now uses a jobKey with replace
- Fixed an issue with ZodWorker when using jobKey
* Publish improvement docker images
* fixed the improvement docker publishing
* Downgrade back to prisma 4.16.0 because 5.1.x broke docker builds
* Changes to how queued runs work
- Split the worker into two different workers, one dedicated to performRunExecution
- Schedule performRunExecution in a single place, with a queue and using a round robin manually controlled concurrency
- Remove startQueuedRuns
- All runs are queued before they are started
- Setting the worker maxPoolSize to the same as the worker concurrency
- Starting to be able to split the docker image
* Remove queue name from startRun graphile job
* Make the prisma connection pool stuff configurable through env vars
* Hardcode (for now) the max concurrent runs limit
* Rewrite performRunExecution to be more performant
PerformRunExecutionV2:
- Does not create and manage jobRunExecution records
- Does not reimplement retrying, uses graphile worker retrying instead
I’ve kept around PerformRunExecutionV1 so this works when deploying. Definitely needs LOTS of testing
* Fix issues with cached tasks
- Limit the size of the cached tasks sent when executing a run, using the knapsack problem dynamic programming approach
- Actually USE the cached tasks in IO by using the idempotencyKey instead of the task ID
- Remove output from all logs
- Added a stress test job catalog
* Forgot to commit the logger updates
* Never log connectionString
* Login to docker hub to get around rate limits
* Add additional logging to the graphile workers
* Fix the *_ENABLED env vars
* Allow adding and removing jobs to be done from the webapp
* Don’t set the job to failed if it’s being retried
* Deprecated queue options in the job and removed startPosition. Now using the job/env combo as the job queue name
* Dequeung jobs doesn’t check if the runner is initialized
* Fixed issues with retrying a run getting stuck on a cancelled task, and errors from parsing the results of dequeing a job
* Remove queued round robin thing that isn’t used anymore
* Added slack to job catalog
* Better forwards compat
* Added long delay
* Fixed lock file
* Setup project-wide prettier
* Remove old workspace file
* Remove old debugging directives
* New top-level .prettierignore
* Updated Prettier config settings
* Contrubuting guide: Fix for some bad code blocks
* Added more ignores
* Improved the format script command
* printWidth set to 100
* Formatted entire repo (pnpm run format)
Eric Allam