* AI SDK sql generator and approval example WIP
* Create some nice spans and extract the tools out so we can get the type of the streams
* Enable AI SDK telemetry
* Adding ai.tool and removing toolTask, 3rd party telemetry spans now wil create partials, better ai SDK telemetry icons
* Created a separate d3-chat example, split out from the openai-agents example
* Fixed the tool options being passed to metadata in `ai.tool`
* Add a link to the run
* Slightly improved design
* Add a crawler task using crawl4ai
* Use a tool to get the userId
* Couple of tweaks
* Adding markdown rendering to assistant messages and added an e2b based chart rendering task
* Backup to anthropic
* Add changeset
* re2: fix @trigger.dev/core exports
* re2: WIP env based queue selection algo
* more wip
* WIP
* Get run engine tests to pass
* Adding tests for the fair dequeueing strat in the run engine
* Configure the new queue selection strategy in the webapp and get it all building and typechecks passing
* webapp now uses built packages, building redis-worker, run-engine, database, using better tsconfig setups for tests, moving isomorphic code into core/v3/isomorphic
* Fixed webapp typechecks
* dev now depends on build, fixed supervisor typecheck
* Fixed run engine tests
* Fixed e2e tests
* bump worker version
* Suggested glossary for the RunEngine, TBC
* Removed BatchTaskRun changes from this branch, they were done in main
* Set the BatchTaskRun status to completed when all runs are completed
* When dequeuing respect passed in maxResources
* Ported over the new run props: idempotencyKeyExpiresAt, versions, oneTimeUseToken, maxDurationInSeconds
* Didn’t hit save… the new props when triggering tasks passed through
* Idempotency expiration + waitpoint edge case
* WIP on creating checkpoint, parking for now
* fix worker routes
* upgrade webapp node types to support generic event emitter
* separate event bus handler singleton and run failure alerts
* duration waits
* fix execution snapshot debug spans
* task waits
* fix event bus types
* temporary fix for react hook run handle type
* disable run notifications for now
* convert any typecasts to expect errors to more easily fix later
* fix webapp types after node types upgrade
* updateEnvConcurrencyLimits across marqs and the runqueue
* Pass proper values into the run engine
* RunQueue settings and removed unused rebalancing workers
* Remove rebalancing prop
* Tidied more things up
* Update/remove queue limits for MARQS and RunQueue
* taskQueue/concurrencyLimit changes ported back into the RunEngine
* Reworked completing waitpoints to improve performance and reduce race conditions
* Improved test robustness
* Down to a single run lock only when a run is totally unblocked and ready to continue
* warm starts, worker notifications, wait fixes
* Fix for Run Engine poll interval env var
* Expect the waitpoint to be completed quickly
* If a run is locked then it’s too late to expire it
* Added VALKEY_ env vars and plugged them into the run engine
* Extracted and updated the guard queue function so it can be used when batching
* Added logging and universal concurrency changes to trigger task v1
* Added notes back in
* Bump @trigger.dev/worker to 3.3.7
* reportInvocationUsage for the runAttemptStarted event
* improve execution snapshot span debug span start times
* Unfriendly IDs
* update lockfile
* Created a shared determineEngineVersion function
* disable unfinished commands
* save new cli config to different location, misc fixes
* add basic engine version check via current deploy
* new run engine will default to node 22 runtime
* block some actions for projects on previous run engine
* fix worker group tests
* fix triggerAndWait test
* one typescript version to rule them all
* redlock type patch
* fix type issues caused by ts-reset
* improve cleanup scripts
* add missing socket.io dep
* fix run notification handler type
* fix worker group test again
* generate prisma client for e2e tests
* remove worker group tests for now
* prevent image pull rate limits during unit tests
* increase timeout for queue concurrency limit test
* generate prisma client for preview release
* same node types everywhere
* Updated engine readme, removed legacy system notes
* use default machine preset from platform package
* worker instances plural in schema
* disable pnpm update notifications
* return worker group details from connect call
* add workers admin route
* fix heartbeat route return type
* move deployment labels to core apps
* refactor run controller env schema
* Add firstAttemptStartedAt to TaskRun
* RunEngine 2.0 batch trigger support (#1581)
* Make it clear when BatchTriggerV2Service is used
* Copy of BatchTriggerV2Service
* WIP batch triggering
* Allow blocking a run with multiple waitpoints at once. Made it atomic
* Removed unused param
* New batch service
* Pass through the parentRunId and resumeParentOnCompletion
* Use the new batch service, and correct trigger task version
* Force V1 engine if using BatchTriggerV2Service, we’ve already done the check at this point
* Removed the $transaction and early exit if nothing changed
* Adedd a simple batch task to the hello world reference catalog
* Fix for batch waits not working
* Added parentRunId in a couple more places
* Removed waitForBatch log
* Added another parentRunId
* Expanded the example to include all the different triggers
* More changes to blocking to support continuing after idempotent completed runs
* Fix for the wrong type when blocking a run
* remove @map
* optimise worker auth query
* add engine version header to core api client requests
* remove unique constraint for default group id
* consolidate migrations
* the first managed worker becomes the global default
* Debug events off by default, added an admin toggle to show them
* worker group name can't be an empty string
* add exec helper to core
* move machine resources to core
* add pre-dequeue callback to determine max resources
* optionally skip dequeue
* bump worker package
* move worker to core
* fix ReadableStream type error
* fix another type issue
* update a few more tsconfigs
* add metadata changes introduced in #1563
* Run Engine 2.0 trigger idempotency (#1613)
* Return isCached from the trigger API endpoint
* Fix for the wrong type when blocking a run
* Render the idempotent run in the inspector
* Event repository for idempotency
* Debug events off by default, added an admin toggle to show them
* triggerAndWait idempotency span
* Some improvements to the reference idempotency task
* Removed the cached tracing from the SDK
* Server-side creating cached span
* Improved idempotency test task
* Create cached task spans in a better way
* Idempotency span support inc batch trigger
* Simplified how the spans are done, using more of the existing code
* Improved the idempotency test task
* Added Waitpoint Batch type, add to TaskRunWaitpoint with order
* Pass batch ids through to the run engine when triggering
* Added batchIndex
* Better batch support in the run engine
* Added settings to batch trigger service, before major overhaul
* Allow the longer run/batch ids in the filters
* Changed how batching works, includes breaking changes in CLI
* Removed batch idempotency because it gets put on the runs instead
* Added `runs` to the batch.retrieve call/API
* Set firstAttemptStartedAt when creating the first attempt
* Do nothing when receiving a BATCH waitpoint
* Some fixes in the new batch trigger service… mostly just passing missing optional params through
* Tweaked the idempotency test task for more situations
* Only block with a batch if it’s a batchTriggerAndWait… 🤦♂️
* Added another case to the idempotency test task: multiple of the same idempotencyKey in a single batch
* Support for the same run multiple times in the same batch
* Small tweaks
* Make sure to complete batches, even if they’re not andWait ones
* Export RunDuplicateIdempotencyKeyError from the run engine
* Latest lockfile
* Trigger with a machine (old run engine)
* RE2, allow setting machine when triggering
* Fix for new glob patterns
* add max run count to dequeue from version route
* add worker instance name env var and header
* queue consumer pre skip callback
* poll for more runs after final execution errors
* fix dequeue search param schema
* add shortcut to debug switch
* expose run engine timeouts as env vars
* make warm start durations configurable
* add optional status to json reply helper
* fix preSkip hook, add debug logs
* BLOCKED_BY_WAITPOINTS -> SUSPENDED
* exit controller when run suspended
* check if already replied before http reply
* run controller will wait for next run after the current one is suspended
* cancel run button shortcut
* minimal event repository environment type
* fix update metadata call
* run suspension and misc fixes wip
* change debug shortcut to shift + D
* Started work on the Dev supervisor
* Formatting
* Fix for bad imports
* Before rebuilding SSE
* Presence updating from the CLI working via SSE
* add worker notification debug logs
* send run:stop when exiting run phase
* skip current snapshot poll on worker notification
* add more logs and route to submit run debug logs
* add worker and runner ids to snapshots
* improve run notification debug logs
* add workload debug log route
* misc run controller fixes and refactor
* prevent parallel execution of critical functions
* update bun to 1.2.1
* WIP with dev dequeuing
* Method to convert friendlyIds to non-friendly, do nothing with actual ids
* Set the engine on BackgroundWorker, lazily upgrade projects to engine V2
* Runs with ttls were getting immediately expired… oops.
* Pass the Waiting for deploy reason through, so we have it on the execution snapshots
* Fixed the logic for getting the right background worker for a run
* Use the correct ID when dequeuing…
* determineEngineVersion is now fully functional
* Rate limiter ignores the dev endpoints
* Retrieving a batch gives you the runIds
* Set a unique version for the RE2 BatchTaskRun
* add provisional changeset
* The start of dev run execution is working
* First dev run working
* Moved the dev run controller closer to what Nick did with the managed one
* export exec output type
* Heartbeat fix: don’t heartbeat if _isHeartbeating == false
* Dev runs get notifications, some dev bug fixes
* Improved logging or dequeuing
* We need to dequeue runs from the latest version too, for triggerAndWait
* Ported Eric’s validateWorkerManifest with nicer errors
* When flattening an idempotency key if part is undefined, return undefined
* Dev logging fixes
* Remove sigterm listener
* Deprecating workers. Don’t specify a BackgroundWorker when dequeuing an environment
* Deleted some old files. Renamed “managed” to “deploy”
* When a build finishes, always copy the build dir (otherwise the first one gets trampled on by the 2nd)
* Dev master queues should work differently
* Deleting old workers
* Added debounce function to core
* Improvement to canceling
* WIP on debounce canceling on socket disconnection
* Added environment data to execution snapshots
* Dev runs that have stalled get “Canceled” with a reason explaining why
* Show CLI messaged when a connection to the platform is lost/restored
* Fix TriggerTask after merge
* Add trigger task v2 max attempts, replace some findUniques
* Port the new queue logic to the run engine
* More fixes post-merge
* We weren’t setting a `retryConfig` up for the tests… it’s now required
* Start the Redis worker inside the Run Engine… 🤦♂️
* Trying to make the testcontainers more reliable
* Added keyPrefix: "engine:”
* Badly placed bracket in trigger task
* Better Redis namespacing
* Fix for expired run not getting removed from the queue
* Don’t create a redis client in the testcontainers, return the redisOptions instead
* Cleanup redis client in the run lock tests
* Fix for the RunQueue not supporting keyPrefix
* Updated more of the RunQueue scripts rebalancing
* Trying to make Redis more robust in the tests…
* Improved test resiliciency more
* Fix for delays (checkpoint check)
* Increase the timeout slightly to fix ttl test
* Added priority support when triggering
* More wip trying to make test containers more reliable
* batchTriggerAndWait test is still failing… some wip to try fix it
* Fixed redis tests now we’re not providing a client
* Separate Redis clients for the run engine worker/queue/runlock
* Made the wait for duration test more resilient
* Added idempotencyKeyExpiresAt to Waitpoints
* Waitpoint timeouts and idempotency expiry
* Use finishWaitpoint, removed extra worker job
* Added waitpoint idempotency tests
* Creating resume tokens is working
* Some improvements to the resume tokens
* Moved resumeTokens to just be wait functions 🥳
* Delete old RuntimeManagers
* Wait for token is working
* Better test for the wait tokens
* Improved the test task some more
* Hide the accessories in the span inspector
* WIP on waitpoint inspector
* WIP on complete waitpoint form
* Span overview panel can be changed based on the entity type
* Improved the waitpoint display
* WIP on completing waitpoint form
* Use the existing CodeBlock for the tip
* Style improvements
* Complete waitpoint
* All waitpoint sidebar variants
* Waits now use a pause icon
* Durations waits use the API to create/block with a waitpoint, not the runtime
* Fix for engine.blockRunWithWaitpoint required org id
* Removed old wait code from the run controllers/task run process
* Form action for skipping a datetime waitpoint
* Move testDockerCheckpoint to a separate core package export (it can’t be bundled on the client)
* Fix for glitchy hourglass animation
* Completed waitpoints display better
* Increase Redis maxRetriesPerRequest to 20 (default)
* Completing and skipping waitpoints is working
* Remove the database prisma dev command, since we need to use create only now. Updated docs
* Added skip timeout, reworked the UI
* Tweaked spacing
* Added payload limit to waitpoint token completion from dashboard
* Test idempotency works on wait.for and wait.until
* Moved the worker-actions to /engine/ from /api/
* Moved dev engine endpoints to /engine/ from /api/
* Separate /engine/ rate limiter
* Added parallel wait prevention, it’s working for duration waits but not well for triggerAndWait yet
* WIP post-merge conflicts
* Set taskEventStore column in the new engine
* Remove duplicate keys
* Post-merge fixes
* Fix for span merge layout
* Use executedAt instead of firstAttemptStartedAt
---------
Co-authored-by: Matt Aitken <matt@mattaitken.com>
* engine v1 fairness improvements (env based queue selection)
* Add ability to bias env selection by concurrency limit and capacity
* Add some randomization to the list of queues within each evn
* Configure biases using env vars
* Typo
* revert v3 catalog project ref change
* Fix v2 marqs
* WIP realtime streams
* Handle realtime with large payloads or outputs #1451
* feat: optimize Redis stream handling with batching
Add STREAM_ORIGIN to environment schema. Improve performance in
RealtimeStreams by using TextDecoderStream for simpler text
decoding and implementing batching of XADD commands for Redis
streams. Limit stream size using MAXLEN option. Update
environment variable repository with new variable type. Adjust
import statements for Redis key and value types.
* 🔧 chore: add dev dependencies for bundle analysis
* add metadata tests and a few more utilties
* Add stream tests and improve streaming
* Added AI tool tasks, descriptions to tasks
* Use the config file path to determine the workingDir, then the package.json path
* Remove stream test files
* useTaskTrigger react hook that allows triggering a task from the client
* Add streaming support for the realtime react hooks
* Add ability to stream results after useTaskTrigger
* Improve the stream throttling
* Use the runId as the ID key to bust the cache after triggering
* Upgrade to to the latest electric sql client and server
* Make realtime server backwards compat with 3.1.2 release
* Pass the runId into useRealtimeRun
* Fix scopes when specifiying reading all runs
* WIP @trigger.dev/rsc package
* Various fixes and accepted recommendations by CodeRabbit
* Regenerate pnpm lock file
* A couple tweaks to rsc and give up on rendering react in tasks for now
* Add changeset
* Remove triggerRequest from the useEffect deps
* Improve realtime & frontend authentication errors
* Fixed authorization tests
* Remove unnecessary log
* Add metadata.stream limits and improve the metadata streams structure
* Streams can now have up to 2500 entries
* Various coderabbit fixes
* additional react-hooks jsdocs
* Fixed empty env vars overriding in dev runs
* Don’t import package.json anymore
* fix node10 moduleResolution in @trigger.dev/core
* Support self-hosters pushing to a custom registry when running deploy
* dev: Fixed stuck runs when a child run fails with a process exit
* Make some doc notes about known issues and docker hub private repos
* Fix --project-ref when running deploy
* Fix —config option when deploying
* Fixing the flushing/killing process with the new build system
* Add monorepo-react-email e2e test fixture
* Fix issue with emitDecoratorMetadata and tsconfigs with extends
* Got the emit decorator metadata fixture working
* Fixed typechecking yarn e2e CLI tests in monorepos
* Add remote forced externals system, in case we come across another package that cannot be bundled (spurred on by header-generator)
* Remote externals now powered by JSON Hero to be easier to update
* resolve config source files
* Add a —javascript option to init, defaults to typescript
* Add support for prisma typed sql
* Remove msw and retry.interceptFetch
* Add missing code to the openai retries example
* Don’t generate the v3 catalog prisma client during CI
* Fixed v3-catalog task imports
* Remove interceptor usage in task file
* Only import import-in-the-middle hook if there are instrumented packages
* Fix yarn.lock file
* Support custom config file names & paths
* Fix entry point paths on windows
* Support custom conditions
Add support for custom conditions (for bundling and running), to support being able to import `ai/rsc` with the “react-server” condition.
- Fixed an issue where symlinking unresolvable externals after rebuilding caused the build to hang
- Fixed an issue with external not working with subpath exports (e.g. “ai” would not match “ai/rsc”)
- Protect better against build extensions breaking builds
* Add changeset
* Fix passing CLI process.env down to the task processes
* Remove unused import
* reviving the e2e CLI tests
* Another attempt at fixing windows
* yet another windows attempt (yawa)
* Output index child stdout and stderr (yawa)
* normalize import paths for windows
* Added some logging (yawa)
* normalize the loader path as well
* Added some logging to figure out why the entry points aren’t being found on windows
* Fix for entry point detection on windows
* Normalize runner import loader path
* Normalize import paths in dev and make sure rewritten build manifest paths are correct on windows as well
* Various cleanup after windows fixes
* Remove the webapp e2e for now
* Add node10 type resolution support for subpath exports (still does not actually import in Node 10 or Browserify/Parcel)
https://github.com/andrewbranch/example-subpath-exports-ts-compat
* init using templates again but downloaded from the repo this time
* Adding init schedule example
* Support for js init
* init now working with js
* Fix issues with links in terminals that don’t support them. Also skip update check of version starts with 0.0.0
* upgrade @opentelemetry packages to the latest versions
* remove v2 only packages, will be moved to a dedicated repo
* remove more v2 code and run pnpm install
* use the npm yalt package in the webapp
* convert @trigger.dev/core to tshy
* Switch from jest to vitest in @trigger.dev/core
* Fixed core test
* move core-backend code into core subpath export
* convert @trigger.dev/sdk to tshy
* Removed hono
* move core-apps to core/v3/apps, remove core-apps, start converting cli-v3
* Fix up some of the commands
* cli now building and loadable
* using package-json-from-dist to get package version now in core and cli
* dev command WIP
* cleaned up some repetition and structure of the entry point stuff
* bringing back the background worker stuff
* Indexing of the v3 catalog
* getting closer to executing dev runs...
* centralize dev logging using event emitter
* Move indexing to it’s own entry point, simplify code
* dev runs working
* Get instrumentation to work with openai
* debugging achieved internally
* provide worker files as part of the worker creation on the server
* support for cjs and esm javascript
* Fixed timeout
* worker manifest now has the config path
* auto-upgrade config to non-deprecated alternatives
* Adding package preview release
* deployment WIP
* improve the syncEnvVars output and adapt resolveEnvVars
* WIP bun runtime
* WIP bun support
* seed tasks with the machine preset if listed in the config
* deploy run executions WIP, extracted TaskRunProcess into 1 place
* deployed tasks running and executing 🎉
* support for waits and better flushing & process cleanup
* Fixed the heartbeating
* Better warning messages
* Improve and unify the indexing between dev and deploy
* Support for external deps that need node-gyp to build
* build extensions can now install custom packages and run instructions in the image. Also prisma extension now works and also works with multiple schema files
* Add back in the main/types/module to sdk
* dev no longer is Ink/React, grace period for disconnections in dev
* Fix the changeset config
* More changeset fixes
* Remove config packages
* More changeset fixes
* Fixed typescript issues (needed to revert back to zod 3.22.3
* Fix pr_checks workflow
* Remove the prepare script
* Fixed tests and package versions
* Remove cli test script
* Remove packages from tailwind watch paths
* Add repo to public packages
* Just commit the generated files and do the building at dev time
* Try and get pkg.pr.new working
* Try again
* Fix emitDecoratorMetadata importing named export from typescript
* config file backwards compat with export const config
* Fixed issue where import errors weren’t coming through
* p-retry is a prod dep
* typescript needs to be a prod dependency for emitDecoratorMetadata
* Add better debug logging to help track down import-in-the-middle bug
* An external is only considered resolvable if it resolves to the same path as the collected external
* Fix runtime checks to allow >=18.20
* Move extensions to a new build package
* Fixed building packages in dockerfile
* Remove the e2e test from publish workflow for now
* Don’t treat pkg.pr.new versions has needing upgrading
* making sure config handleError works, and discovered path aliases don’t work in config files
* Strip empty string env vars so they accidentally override real values
* Couple of things
* Update version to use preview instead of beta
* Hopefully fix re-attempts with >30s delay
* Match socket emit messages to current latest in main
* Initial guide
* Go back to beta
* Go back to the preview, and update guide to use pr preview tags
* Go back to beta
---------
Co-authored-by: Matt Aitken <matt@mattaitken.com>
* WIP env var management API
* Add import env var API endpoint
* Adding docs and support for using both API keys and PATs when interacting with the env var endpoints
* WIP envvar SDK
* Uploading env vars in a variety of formats now works
* Finish env var endpoints and add resolveEnvVars hook
* Add changeset
* Better error output when an ESM only package is required
* Add better errors for npm package errors, and bring deploy errors to the dev CLI
* Handle depot build errors and write out a temporary file to view the build logs
* Add changeset
* A bunch of changes to the config file:
- No more default export, the config is exported via the `config` named export
- `handleError` is moved to a separate named export
- Added the ability to include additional packages (e.g. wrangler) that aren’t included by default (think CLI usage)
- More reliably install packages in dev
- The config is now built first instead of directly imported, meaning we can now support typescript config files (`trigger.config.ts`)
* Update to trigger.config.ts in `trigger.dev init`
* WIP proxy/deploy
* WIP, registry proxy in express working
* A couple of notes, preparing for indexing
* Move the changes to prod-worker into the new file
* Deploy command working with indexing and runs (docker provider only for now)
* Removed ts-expect-error directive
* Fixed build command
* Support for batch triggers
* Various trace fixes and improvements
* Moved trace into the logger, fixed span cardinality issues with waits and triggers
* Add support for attaching a debugger in dev with —debugger flag
* Introducing Modular Asynchronous Reliable Queueing System (MarQS). Works in dev
* Convert MarQS to using lua and dealing with concurrency
* Simplified the timeout queue and current concurrency is now a set instead of a flat value (to support idempotency)
* Implement task heartbeating and reconnect the background workers CLI when the websocket connection reconnects
* Start adding internal telemetry support for the server
* Get env vars to work in dev and implement prisma tracing in webapp
* Cleanup telemetry and implement it in the consumer
* Implement dequeuing a message from a parent shared queue
* Implement a custom logger exporter instead of using console log exporter
* Use node instead of shell for generating protocol buffer code
* Propogate trace context into debug logs, and allow turning off logger exporter through env vars
* Switch to using baselime for internal otel data
* Make orgMember optional to fix type issues
* Provide the CLI dev env vars through the CLI, don’t build dotenv into facade
* Removed the logger import
* Address Matt’s comments
* Addressing more of Matt’s comments
* Handle sending an execution after a websocket connection closes
* Remove auth from the env attributes to prevent obfuscation
* feat: BYO Auth
Define client-side auth resolvers to be able to supply custom authentication credentials for integrations before a run is performed
- Added new defineAuthResolver
- Update all integrations to support the new auth resolvers
- Strip internal symbols from .d.ts in integrations and trigger-sdk
- Added BYO Auth docs
- Update Dynamic Schedule to support associated account IDs
- Create external accounts just-in-time
- Added Account ID field to test job when there are external auth integrations
- Show Account ID on run dashboard
- Added new Run error state called “Unresolved auth”
* Added changeset
* Remove @internal from TriggerIntegration public methods
* Add void to the result union
* DynamicTriggers now work with the new BYO auth system, and added a bunch of docs and docs changes
* Add additional key material for registering dynamic trigger task
* Add new define* instance methods to the overview
* Setup project-wide prettier
* Remove old workspace file
* Remove old debugging directives
* New top-level .prettierignore
* Updated Prettier config settings
* Contrubuting guide: Fix for some bad code blocks
* Added more ignores
* Improved the format script command
* printWidth set to 100
* Formatted entire repo (pnpm run format)
Eric Allam