* Update projects to use .NET 5.0, the successor to .NET Core
* Fix ambiguous errors. Add IBAutomator net5
* Remove FXCM
* Upgrade IBAutomater to v1.0.51
ignored, and an empty message aborts the commit.
* Fix rebase
- Fix ambiguous Index
- Remove StrategyCapacity.cs
- Update System.Threading.Tasks.Extensionsy
* Remove unrequired references
* Fixes
- Travis will use dotnet, not nunit nor mono
- Remove mono from foundation image
- Fix python setup in research
- Fix unit tests
* Don't call ReadKey when input is redirected
* Fix ConsoleLeanOptimizer
* Research fixes
* Update comment
* Add vsdbg to Dockerfile
* Fixes
- Revert dockerfile FROM custom changes
- Adjust and fix regression algorithms
- Option assignment will be deterministic in the order
- 'Rolling Averaged Population' is calculated using doubles, updating
expected values.
- Update readme, removing references to mono
- Add missing Py.Gil lock
* Replace ICSharp with .NET Interactive
* Fixes after rebase
* CSharp research fixes
- Adding new Initialize.csx that pre loads all assemblies
- Adjusting template research file
- Moving steps in dockerfilejupyter
- Fix unit tests and regression tests after rebase
Co-authored-by: Gerardo Salazar <gsalaz9800@gmail.com>
Co-authored-by: Stefano Raggi <stefano.raggi67@gmail.com>
Co-authored-by: Jasper van Merle <jaspervmerle@gmail.com>
* Refactor HasSufficientBuyingPowerForOrder implementations
Adds Sufficient and Insufficient helper methods to HashSufficientbuyingPowerForOrderParameters
enabling syntax like:
return paraeeters.Sufficient()
returnparameters.Insufficient(reason)
The next change will add the initial margin required which will simply require
updating both of these helper methods to accept the value.
* IBuyingPowerModel: Add margin functions Maintenance/Initial/ForOrder
These were originally hidden in an effort to only expose what's necessary
for the engine to perform its work. Additionally, we encapsulated all of
the method arguments into parameters classes to prevent having to break
anyone in the future. Not including these foundational methods turns out to
be an oversight. These methods are not required by the engine, but rather by
other models. Another possible solution here is to add an additional abstraction
and include these methods on this new abstraction. BuyingPowerModel would then
explicitly implement these methods and models that depend on them would require
two code paths, one for when the buying power model implements this interface
and another for when it doesn't.
Tests were additionally updated to remove test model implementations created for
the sole purpose of exposing these private methods.
* Add ConstantBuyingPowerModel
Provides an implementation of IBuyingPowerModel that returns the same
constant value
* Update BuyingPowerModelPythonWrapper to use reflection for method names
Having a bunch of hard-coded strings is a sure fire way for someone to
overlook when changing methods. This change ensures that noone needs to
remember that this code exists :)
Cleans up the syntax around verifying a python object implements a particular
C# interface via the ValidateImplementationOf<T> method by having it return a
value since the only use cases are in constructors when setting the models.
I was initially going to update ALL python wrappers to validate the passed
in models, but such a change could break many things that are 'working' right
now. Such an effort should be saved for its own dedicated PR.
* Add Parameters/Result types for new buying power model methods
* Support computing maintenance margin for arbitrary quantities
The existing GetMaintenanceMargin function assumes that we're only interested
in the maintenance margin for the entirety of the provided security's holdings.
This makes it impossible to perform what-if analysis or to even ask how much
maintenance margin is devoted to a particular subset of the security's holdings.
This change adds the quantity to the MaintenanceMarginParameters class. Futures
and Options models also depend on holdings cost and holdings value, so they have
also been added to the parameters type. Finally, static factory methods were
added to improve discernment of intent: ForCurrentHoldings provides the existing
behavior and then ForQuantityAtCurrentPrice to support what-if scenarios where
we're looking for the change in maintenance margin if we were to execute an order
for the securiy at the current time step. Obviously a constructor is provided to
set all of the values explicitly, using any price metric the caller desires.
* Address review
- Fix BPM xml documentation
- Fix python unit tests and PythonWrapper validate method
* Add SecurityHolding.QuantityChanged event
Adding event handlers will allow us to orchestrate complex
events from distant parts of the codebase through wiring
them up. If we continue down this path, it will move us away
from the current, very 'mechanical' data flows expressed in
LEAN and towards a more modern, event processing based system.
This is but a baby step in that direction and the initial use
case is using this QuantityChanged event to trigger resolution
of the algoritm's positions groups. This is part of an effort
to improve the fidelity of options margin modeling where we'll
model an OptionStrategy as an IPositionGroup. This will allow
us to compute the margin requirements of an OptionStrategy as
a unit instead of computing margin of each security individually
in isolation.
See #4065
* PortfolioManager: Group fields and remove unused field
This codebase generally places fields as the first members, but
this class had some fields at the top, then some properties, and
then some more fields. This change brings all the fields together
at the top of the file and also removes pointless comments placed
directly above some of the fields. Additionally, an unused field
was removed.
* Remove unused _currencyConverter from Security
Looks like at some point the only code using this member variable was removed
and the necessary clean up was overlooked.
* Add Parse.Enum functions
* Support disabling regression algorithms by language via config.json
Adds 'regression-test-languages' to config.json and filters regerssion algorithms to
run based on this value. When cycling on a particular feature, it's nice to be able
to run the entire regression set while ignoring the python algorithms. Once the C#
algorithms are all passing, one can then go back and run C# and Python in a final run,
since 99% of feature work doesn't impact python specifically.
* Implement IComparable in SecurityIdentitfier
This can be used to deterministically sort securities and symbols
* Add .editorconfig to enforce common formatting for json/sh files
* Fix typo in IBuyingPowerModel.GetBuyingPower xml docs
* Add ListEquals/GetListHashCode and OrderDirection.Closes(PositionSide)
ListEquals and GetListHashCode are designed to be used together as they
complement each other according to C#'s requirements for Equals and
GetHashCode functions.
PositionSide.ToOrderDirection() extension simply converts a PositionSide
to its logical equivalent OrderDirection. Long->Buy, Short->Sell, None->Hold
OrderDirection.Closes(PositionSide) determines if a particular OrderDirection
would have the effect of reducing a position's absolute size. This function
greatly improves the readability of buying power functions that must provide
adjustments when an order/contemplated trade reduces/closes an existing position.
OrderDirection.Buy.Closes(PositionSide.Short)
OrderDirection.Sell.Closes(PositionSide.Long)
All other combinations return false
Adds ToArray/ToImmutableArray convenience functions that combine a call
to Select followed by To(Immutable)Array all in one function call.
* Add decimal.DiscretelyRoundBy extension method
Supports rounding a decimal value by an arbitrarily chosen maximum precision,
or 'quanta'
* Update FutureMarginBuyingPowerModelTests to respect the security's lot size
* Add core position group classes and abstractions
* Add initial/maintenance margin support, buying power model consistency tests
* Add SufficientBuyingPower and GetReservedBuyingPower to position group model
Includes update to BrokerageTransactionHandler to use position group BPM for
sufficient buying power checks.
* Resolve position groups on each fill
We need to update the state of our position groups on each fill so that
we can properly handle multiple orders within the same time step. We
also limit the number of positions sent into the resolver by removing
securities without any holdings.
* fixup! Add SufficientBuyingPower and GetReservedBuyingPower to position group model
* Add GetMaximumLotsFor{Target|Delta}BuyingPower
Instead of computing order quantity, these functions compute the
maximum number of position group lots, which is the position group
quantity, and is guaranteed to be a whole number, for the provided
target/delta buying power parameters.
The SecurityPositionGroupBuyingPowerModel delegates to the security's
IBuyingPowerModel by applying a scaling factor equal to the security's
lot size.
This change also updates references to IBuyingPowerModel.GetMaximum...
to use the new position group model methods.
* Convert remaining IBuyingPowerModel call sites to position groups
* Rename PositionManasger.CreateDefaultGroup -> GetOrCreateDefaultGroup
Better describes its behavior
* Add Position Groups readme.md
* Add Option Strategy BuyingPowerModel
- Adding CompositePrositionGroupResolver and
OptionStrategyPositionGroupResolver
- Adding OptionStrategyPositionGroupBuyingPowerModel handling option
strategies based on IBs margin table. Adding regression algorithms
- Few changes so that option strategies executed by multiple orders are
detected
- Adjust OptionStrategyDefinitionMatch to include equity legs in the
matching result
- Minor tweaks fixing previous rebase
- Minor fixes for existing option strategies definitions, adding new
missing strategies.
- Fixing minor bugs in option strategy matcher. Adding more unit tests
* Address self reviews
- Fixing bug in 'PositionGroupCollection'
- Few minor simplificaitons
- Adding BasicTemplateOptionEquityStrategyAlgorithm
* Address reviews
- Improve regression algorithms margin remaining and used assert logic to be exact. Taking into account spread and fees
Co-authored-by: Michael Handschuh <mhandschuh@gmail.com>
* fixing up Coin API streaming
* Fixing file name
* Adding log showing CoinApi product plan
Co-authored-by: Martin Molinero <martin.molinero1@gmail.com>
* Updates CPU performance metrics gathering for project modernization
* PerformanceCounters are not supported cross-platform in
.NET Core/5.0, which requires the use of an alternative method
in the gathering of performance metrics. Since no exposed .NET API
exists to gather these metrics without blocking, a new thread is
created to block the time necessary for the CPU performance to be
calculated.
* Address review: remove ResetEvent and make CpuPercent atomic
* Dispose of CpuPerformance instance before exiting Lean
* Minor tweak for Task and comment
Co-authored-by: Martin Molinero <martin.molinero1@gmail.com>
* Some app.config files were kept to either enable features
that are only enable-able via the config files, or binding redirects
for DLLs that are not packaged with NuGet (i.e. VisualStudio
package, required to run tests successfully @ 15.0.0.0)
* Atreyu Brokerage initial setup, and changes required for integration with main Atreyu project
* Address reviews
Co-authored-by: Martin Molinero <martin.molinero1@gmail.com>
* Migrate to newer CSProj format; build succesful
Rebase onto master
* Maintain binaries directory
* Reinstate FSharp default condition
* Remove reference to packages.config
* Test project fixes
* Remove nuget.config and "Solution Items"
* Remove repetitive assembly info
* Reinstate default compiles and cleanup redundant settings
* Reinstate any specific settings that defaults are unclear for
* Reinstate Framework.nuspec
* Make test internal classes public for composer use; undo assembly change
Rebase onto master part 2
* Address review; restore some settings
* Restore RootNamespace and AssemblyName attributes
* Use NugetPackageRoot instead of NugetPackageFolders
* Reinstate "RestorePackages" setting
* Transfer compilied Python files to launcher and tests bin
* Remove conflicting settings
* Fix WebSocketSharpFork references
* Fix FSharp Core reference
* Upgrade TestPlatform.ObjectModel to 16.8.3, and redirect V11 binding
* Add Mono.Cecil package
* Address review
* Fixed Python runtime issue that was occurring when trying to generate reports locally on OSX/mono, but assume the issue impacts all configurations.
* Move Python.Runtime config to common
* Remove duplicate files
* Update readme
* Typo
* Change destination in build directory
Co-authored-by: Charles Naccio <cnaccio@gmail.com>
* initial commit
* run parametrized algorithm with command line parameters
* skeleton: top level structure
* OptimizationNodePacket scheme
* pass parameters as HashSet
* run Lean and read results
* call method on optimization completion
* refactor public interfaces
- close ParameterSet collection; allow only get operations
- explicit method to start LeanOptimizer
* synchronize RunLean method; the result could come in before the backtest id is set in the collections
* another portion of refactoring and interface changes
* comments
* comments & tests for Extremum, Minimization and Maximization classes
* unify optimization paramater values (min, max, step) & mode GridSearch tests
- swap min&max if necessary
- iterate left => right (negate step value if necessary) & provide default step value if step == 0
- no StackOverflow Exception
- parameterSet Id should be global for current generator and retain between steps
- test signle point boundary (min == max)
* BruteForceStrategy tests
* more comments
* Update Optimizer assembly information
- Update Optimizer projects assembly information to match behavior of
the other projects
* Tweaks
- Adding comments
- Replace OnComplete for Ended event
- Replace Abort for Dispose
- ConsoleLeanOptimizer will keep track of running processes
- Each backtest will store results in a separated directory, so they
don't fight for the log.txt file.
- Adding cmdline option for lean to close automatically
- Adding concurrent execution backtest limit
- Console optimizer will start Lean minimized
- Escape spaces in Json path
* remove parameter set generator abstraction layer
we don't need this flexibility now.
* refactor public methods; Step shouldn't be public
* constraints: wip
* define contract
* comparison operators and tests
* specify JsonProperty values
* Move SafeMultiply100 to extensions
* Throw exception on failed Optimizer.Start
* constraints: wip
* change finish & dispose process
* minor fixes
- handle force lean abort
- notify consumer if target has been reached
* target & constraints; adapt unit tests
* Minor Tweaks and fixes
- Some logging improvements
- Remove Public since not required
* Ignore empty ParameterValue
* simplify condition
* avoid reinitialization
* reduce type; force immutable
* unit tests for constraints and target value
* parse & normalize percent values, i.e. 20% => 0.2
* fixup
* Target & Constraint & OptimizationNodePacket unit tests
* Add more json unit tests
- Adding more json conversion unit tests. Fix bug for Extremum which
wasn't using the converter.
* LeanOptimizer tests
* Estimation results
* User thread safe counters
* LeanOptimizer unit tests; push OptimizationResult on Ended event
* more unit tests
* Minor tweaks
-Estimate ToString in a single line.
-Typos and missing header file
* Add base SendUpdate method
- Add base SendUpdate method for LeanOptimizer
* fix LeanOptimizer test; rely on internal Update rather than timer
* Add OptimizationStatus
- Add missing commments and OptimizationStatus
* EulerSearch implementation: wip
* OptimizationParameter custom converter
* change the type
* make step optional
* change folder structure
* enumerate optimization parameter using IEnumerable & IEnumerator
* unit tests: parameters & objectives
* unit tests: strategies
* remove redundant TODO
* change Euler search boundaries
* more Euler tests
* prevent race condition
* Add account/read endpoint
- Adding account/read endpoint. Adding unit test
* Add status check before running lean
* Minor self review
- Adding missing comments, minor changes
* remove array parameters
* minor changes
- tidy up config file, rename variable
- accept min less or equal than max
* move OptimizationParameter methods to strategies
* Minor improvements for BaseResultHandler derivates
* minor changes
- strict requirements for Step and MinStep values
- strategy specific settigs
* Add TotalRuntime to estimate
Co-authored-by: Martin Molinero <martin.molinero1@gmail.com>
* Add property IBrokerage.AccountBaseCurrency
* Set AccountCurrency to brokerage AccountBaseCurrency
* Remove USD AccountCurrency check
* Fix Oanda account base currency
* Fix currency symbol in CashBook.ToString()
* Fix unit tests
* Address review
* Add DebugMessage when changing account currency
* Add debug message for brokerage account base currency
* Fix currency symbol in equity chart and runtime statistics
* Update unit tests
* Binance Brokerage skeleton
* Market hours
* Implement Symbol Mapper
- known symbols available on /api/v1/exchangeInfo
- fiat currencies are pegged
* Implement GetCashBalance
* Implement GetAccountHoldings
- there are no pre-existing currency swaps
- cash balances are pulled and stored in the cashbook
* Implement GetOpenOrders
* Manage orders: PlaceOrder
* Manage orders: UpdateOrder
Update operation is not supported
* Manage orders: CancelOrder
* Messaging: order book
* Messaging: trades
* Messaging: combine streams
- connect to fake /ws/open channel on init
- case by channel name, but not event type
* Messaging: order depth updates
- ticker symbol is not enough as it pushes updates only once a second, this would be a very incomplete data stream
- fetch ticker snapshot if lastUpdateId == 0
- follow Binance instructions for keeping local orderbook fresh
* Messaging: user data streaming
- Request userDataStream endpoint to get listenKey
- keep listenkey alive
- handle order close event
- handle order fill event
* DataDownloader: get history
- we can aggregate minute candles for higher resolutions
* fix data stream
* Tests: FeeModel tests
* Tests: base brokerage tests
* Tests: download history
* Tests: symbol mapper
* Support StopLimit andd StopMarket orders
* StopMarket orders disabled
Take profit and Stop loss orders are not supported for any symbols (tested with BTCUSDT, ETHUSDT)
* Tests: StopLimit order
* Tests: crypto parsing
* Reissue user data listen key
* comment custom currency limitation
* rework websocket connections
* implement delayed subscription
* adapt ignore message
* add license banner
* use better suited exception type
* avoid message double parsing
* support custom fee values
* extract BinanceApiClient to manage the request/response between lean and binance
* use api events to invoke brokerage events
* do not allow to terminate session if it wasn't allocated.
* update binance exchange info
* tool to add or update binance exchange info
* ExchangeInfo basic test
* Rebase + Resharp
* Binance brokerage updates
- Fix sign bug in sell order fills
- Fix bug in GetHistory
- Remove duplicate symbol from symbol properties db
* Remove unused code
* Revert removal of account currency check
* Update symbols properties database
* Address review
* Address review
- Upgrade API endpoints from v1 to v3
- Updated sub/unsub for new subscription manager
- Subscribe best bid/ask quotes instead of full order book
- Added handling of websocket error messages
- Cleanup + refactor
* Update symbol properties database
* Remove list from symbol mapper
* Fix symbol mapper tests
* Address review
- Fix resubscribe after reconnect
- Fix quote tick edge case
* Fix EnsureCurrencyDataFeed for non-tradeable currencies
* Fix check in EnsureCurrencyDataFeed
* Reuse base class subscribe on reconnect
Co-authored-by: Adalyat Nazirov <aenazirov@gmail.com>
Co-authored-by: Martin-Molinero <martin@quantconnect.com>
* Add PolygonDataQueueHandler
* Add history provider and downloader for Polygon
* Add aggregator to PolygonDataQueueHandler
* Address review
- Removed duplication in message classes
- Added public Subscribe/Unsubscribe methods in PolygonWebSocketClientWrapper
- Added history requests for Forex and Crypto
* Address review
- Add security type and market arguments to downloader
- Fix time zone bug in downloader
* Remove unnecessary locks
* Add Polygon history for all resolutions
- Equity: trades and quotes
- Forex: quotes only
- Crypto: trades only
* Live Coarse universe refactor
- Live trading will source Coarse and Fine fundamental data directly
from disk. Updating unit tests.
* Adds ILiveDataProvider interface
* Adds wrapper for IDataQueueHandler implementations
* Replaces IDataQueueHandler with ILiveDataProvider in
LiveTradingDataFeed
* Edits IDataQueueHandler documentation
* Maintains aggregation for current IDQH impls and skips for ILDF impls
* Note: No unit test was created for this method, go back and TODO
* Protobuf Market data
- Adding protobuf support for Ticks, TradeBars and QuoteBars. Adding
unit tests.
* Adds unit tests for LiveDataAggregator changes
* Fixes bug where custom data was not handled as it was before
* Fixes race condition bug because of variable reuse in class
* Add protobuf extension serialization
* Fixes for protobuf serialization
* Refactor
* Fix OptionChainUniverse
* replace BaseDataExchange pumping ticks with consolidators
* AlpacaBrokerage
* BitfinexBrokerage
* GDAXBrokerage
* OandaBrokerage
* InteractiveBrokers
* TradierBrokerage
* FxcmBrokerage
* PaperBrokerage
* etc
* WIP fixes for existing LTDF unit tests
* Fixes more LTDF unit tests
* make IDataAggregator.Update recieving Generic BaseData rather than Tick
* Change IDataQueueHandler.Subscribe method
* Some fixes after adding new commits
* Adds protobuf (de)serialization support for Dividend and Split
* Serialize protobuf with length prefix
* Fix missing LTDF unit tests
* Adds TiingoNews protobuf definitions
* fix comments
* more fixes on IQFeedDataQueueHandler
* disallow putting ticks into enumerator directly
* ScannableEnumerator tests
* fix OandaBrokerage
* AggregationManager unit tests
* fix AlpacaBrokerage tests
* fix InteractiveBrokers
* fix FxcmBrokerage tests
* call AggregationManager.Remove method on unsubscribe
* fix GDAX existing tests
* Fixes, refactor adding more tests for AggregatorManager
* Adds BenzingaNews protobuf definitions and round trip unit test
* Adds missing TiingoNews unit test to Protobuf round trip tests
* Improve sleep sequence of LiveSynchronizer
* need start aggregating first, and then can subscribe
* More test fixes and refactor
- Refactoring AggregationManager and ScannableEnumerator so the last is
the one that owns the consolidator
- Adding pulse on the main LiveSynchronizer
* Improve performance of LEquityDataSynchronizingEnu
* Add missing Set job packet method
* Minor performance improvements
* Improvements add test timeout
- Improvements adding test timeout to find blocking test in travis
* Improve aggregationManager performance
* Testing improvements for travis
* Remove test timeouts
* More test fixes
- Adding more missing dispose calls and improving determinism
* fix IEXDataQueueHandler and tests
* Final tweaks to LTDF tests
* more AggregationManager tests
* consume and log ticks
* fix test: couldn't subscribe to Forex tickers
* change Resolution for all bar configs
* Improve RealTimeScheduleEventServiceAccuracy
* refactoring: move common code to base class
* fixed bug; unsubscribe SubscriptionDataConfig
* Small performance improvement
* Minor fixes
* Avoid Symbol serialization
* Fixes coarse selection in live mode
* Fix for live coarse
* Adds protobuf (de)serialization support for Robintrack
* Adds round-trip unit test
* Minor performance improvements
* More minor performance improvements
* pass LiveNodePacket through to OandaBrokerage
* Fixes empty list becoming null value when deserializing with protobuf
* Reverts BZ live trading exception removal and fixes tests
* Refactor WorkQueue making it abstract
* Add try catch for composer
* Adds optional data batching period to LiveFillForwardEnumerator
* Override data-queue-handler with config
* Improve PeriodCountConsolidator.Scan performance
* Move batching delay to main Synchornizer thread
* Reverts addition of Robintrack protobuf definitions
* Give priority to config history provider if set
* Add Estimize protobuffing
- Add Estimize protobuffing support. Adding unit tests
* Always dispose of data queue handler
Co-authored-by: Gerardo Salazar <gsalaz9800@gmail.com>
Co-authored-by: Adalyat Nazirov <aenazirov@gmail.com>
Martin-Molinero