Regression Tests / build (push) Has been cancelled
Build & Test Lean / build (push) Has been cancelled
Research Regression Tests / build (push) Has been cancelled
- Fully reset the security cache when it's finally removed from the algorithm.
Adding regression algorithm reproducing issue
- Updating regression algorithms which would trade based on data
previously available
* add data count properties
* 'add history count property
* assert data counts
* update missing override
* consider override/virtual cases
* implement data count
* add message handler for regression tests
* use regression test message handler
* set algorithm manager for regression test message handler
* update data count
* check if stats are present, check if algo manager is not null
* update
* add c# algo
* make same as c# algo
* use new line
* logic shifted to RegressionTestMessageHandler
* cleanup
* auto cleanup
* skip non deterministic data count
* change data count
* use inheritance
* improve stats
* update couht
* add sma indicator to c# and customSMA to python
* call base method before executing further
* skip test
* revert to original
* add duplicate sma
* skip regression test
Regression Tests / build (push) Has been cancelled
Build & Test Lean / build (push) Has been cancelled
* Implement scheduled event sampling solution
* Use UTC time, only update daily portfolio value once a day
* For daily resolutions sample chart always
* Cleanup
* Drop resample daily all together
* Force final sample
* Regression updates
* FIx LiveResultHandler to update portfolio and benchmark values outside of sampling event
* Name the daily sampling event
* Address review pt 1
* Drop force and use reference wrapper
* Adjust tests
* Fix warning for Benchmark Timezone Misalignment and also add test
* Fix for daily resolution orders and test adjustments
* Also warn on universe settings with daily resolution
* Update missed regression
* Fix reference wrapper use
* Update regression after rebase
* Add values back in for Daylight Algo
* Have statistics builder skip day 1 performance
* Regression adjustments
* Test adjustments
* Update regression unit test
* Adjust some regressions starts to show performance values
* Add hourly algorithm for beta comparison
* Address missing Python regression changes
* Remove null comment
Regression Tests / build (push) Has been cancelled
Build & Test Lean / build (push) Has been cancelled
* Filter out small orders based on Setting
- BuyingPowerModel will filter out small orders based on algorithm
setting, a % of PTV, instead of hard coded 1 share value. Addin unit
and regression tests
- Updating regression algorithms to use new setting, reduce order trades
* Update regression algorithms
Regression Tests / build (push) Has been cancelled
Build & Test Lean / build (push) Has been cancelled
* Implement solution with lightest changes possible
* Update regressions v1
* Adjust AlgorithmTradingTests
* Adjust PatternDayTradingMarginBuyingPowerModel tests
* Drop need to loop twice
* Adjust last unit test, with calculations included
* nit - comment fix
* Break out adjustment calculation to static function; add unit test
* Update Py regression
* Upgrade adjustment calculation to be smart enough to get us to target always
* nit - cleanup GetAmountToOrder
* Add license to test
* nit - comment fix
* cleanup GetAmountToOrder further
* Add additional test cases
Regression Tests / build (push) Has been cancelled
Build & Test Lean / build (push) Has been cancelled
* Updates Equity Market Data
* Updates Unit Tests
* Updates Regression Tests
In this commit we include regression tests with small changes (slightly different CAGR, Alpha, etc, but same number of trades) due to the data update.
* Updates Regression Tests 2
The following regression tests were adapt because of verification of hard-coded market data values:
- `AdjustedVolumeRegressionAlgorithm`
- `HistoryWithSymbolChangesRegressionAlgorithm`
- `OptionRenameRegressionAlgorithm`
- `RawDataRegressionAlgorithm`
- `SwitchDataModeRegressionAlgorithm`
The following regression tests have more trades since adjusted prices allowed more 1-2 shares trades that were rounded down to zero before:
- `AddUniverseSelectionModelCoarseAlgorithm` 23 -> 35
- `MeanVarianceOptimizationFrameworkAlgorithm` 12 -> 14
- `PortfolioRebalanceOnDateRulesRegressionAlgorithm` 298 -> 324
- `PortfolioRebalanceOnInsightChangesRegressionAlgorithm` 83 -> 86
- `ScheduledUniverseSelectionModelRegressionAlgorithm` 86 -> 90
- `SectorExposureRiskFrameworkAlgorithm` 17 -> 22
- `SetHoldingsMultipleTargetsRegressionAlgorithm` 8 -> 9
- `StandardDeviationExecutionModelRegressionAlgorithm` 196 -> 199
- `UniverseUnchangedRegressionAlgorithm` 11 -> 17
- `VolumeWeightedAveragePriceExecutionModelRegressionAlgorithm` 237 -> 238
Especial cases:
- `BlackLittermanPortfolioOptimizationFrameworkAlgorithm` 18 -> 17
- BLM model sensibility
- `OptionChainedAndUniverseSelectionRegressionAlgorithm`
The following regression tests have different Capacity because of different volume from lowest capacity asset, except:
- `OptionEquityCoveredCallRegressionAlgorithm` New lowest capacity asset is underlying
- `OptionEquityCoveredPutRegressionAlgorithm` New lowest capacity asset is underlying
* Revert File Update for SPWR and SPWRA
* Fix Regression Tests
Temporarily removes python regression test for `MeanVarianceOptimizationFrameworkAlgorithm` as the `MeanVarianceOptimizationPortfolioConstructionModel` for each version are yeilding different results. If we use C# version in `MeanVarianceOptimizationPortfolioConstructionModel.py`, the results match.
* Changes Optimization Method in MinimumVariancePortfolioOptimizer [Py]
Uses `trust-constr` method.
See https://docs.scipy.org/doc/scipy/reference/generated/scipy.optimize.minimize.html
Build & Test Lean / build (push) Has been cancelled
* Add property for capacity. Remove unused variable
* Move SymbolCapacity and CapacityEstimate to common, passed through Symbol to runtime statistics
* Add null checks
* Remove uninvested and untradable assets from capacty calculations
* Add SymbolCapacity influential period
* Updates Regression Tests
- DelistingEventsAlgorithm
- Allows additional contributions from delisted AAA.1
- DelistingFutureOptionRegressionAlgorithm
- Removes DC01H12 contributions one month later
- FutureOptionBuySellCallIntradayRegressionAlgorithm
- Allows additional contributions from future after expiry replacing the contribution of the next contract option
- DelistedFutureLiquidateRegressionAlgorithm
- FutureOptionCallITMExpiryRegressionAlgorithm
- FutureOptionCallITMGreeksExpiryRegressionAlgorithm
- FutureOptionPutITMExpiryRegressionAlgorithm
- FutureOptionShortCallITMExpiryRegressionAlgorithm
- FutureOptionShortPutITMExpiryRegressionAlgorithm
- FuturesAndFuturesOptionsExpiryTimeAndLiquidationRegressionAlgorithm
- Allows additional contributions from future after expiry
- FutureOptionCallOTMExpiryRegressionAlgorithm
- FutureOptionPutOTMExpiryRegressionAlgorithm
- FutureOptionShortPutOTMExpiryRegressionAlgorithm
- IndexOptionCallITMGreeksExpiryRegressionAlgorithm
- IndexOptionCallOTMExpiryRegressionAlgorithm
- IndexOptionShortCallOTMExpiryRegressionAlgorithm
- Allows additional contributions from option after expiry
- MACDTrendAlgorithm
- Removes contribution when SPY is not invested for over one month
- UniverseSelectionRegressionAlgorithm
- Allows additional contributions from delisted GOOAV replacing GOOG (new symbols)
* Adds Lowest Capacity Asset to Regression Tests
* Normalize expected value -0, because -0 is also written to file if updated
* Write Symbol.Value for lowestCapacitySymbol or empty string for empty Symbol
* Update Regressions
* Update 'Lowest Capacity Asset' to Symbol.ID
Co-authored-by: Jared Broad <jaredbroad@gmail.com>
Co-authored-by: Martin-Molinero <martin@quantconnect.com>
Co-authored-by: Colton Sellers <Colton.R.Sellers@gmail.com>
* Fixes Double to Decimal Cast in GetAnnualPerformance
`GetAnnualPerformance` raises an exception if the `AnnualPerformance` calculation returns a double that cannot be cast to decimal (smaller than `decimal.MinValue` or bigger than `decimal.MaxValue`).
See `ProbabilisticSharpeRatio` where the same solution was applied.
* Updates SPY Market Data
SPY is a key asset since it is the default benchmark, and any change can lead to different `Alpha` and `Beta`
* Updates Unit Tests to Reflect Data Update
* Updates Regression Tests to Reflect Data Update I
Most of the regression tests change because of updated data (market and factors) of SPY (default benchmark) while the total trade remain the same.
* Updates Regression Tests to Reflect Data Update II
The following regression tests were changed to adapt to adjusted prices and keep the total trades:
- `BacktestingBrokerageRegressionAlgorithm`
- `LimitIfTouchedRegressionAlgorithm`
- `PortfolioRebalanceOnCustomFuncRegressionAlgorithm`
- `SetAccountCurrencySecurityMarginModelRegressionAlgorithm`
- `StopLossOnOrderEventRegressionAlgorithm`
- `TimeInForceAlgorithm`
The following regression tests have more trades since adjusted prices allowed more 1-2 shares trades that were rounded down to zero before:
- `FreePortfolioValueRegressionAlgorithm` 2 -> 3
- `PortfolioRebalanceOnDateRulesRegressionAlgorithm` 291 -> 298
- `TrailingStopRiskFrameworkAlgorithm` 5 -> 7
Especial cases:
- `AutoRegressiveIntegratedMovingAverageRegressionAlgorithm` 65 -> 52
- ARIMA model sensibility
- `BlackLittermanPortfolioOptimizationFrameworkAlgorithm` 18 -> 19
- BLM model sensibility
- `ExtendedMarketHoursHistoryRegressionAlgorithm` 20 -> 18
- Less minute bars before market opens
* Addresses Peer-Review
Fix `BacktestingBrokerageRegressionAlgorithm` to use `CalculateOrderQuantity` and round down `quantity` to an even number to pass a value assertion and update the expected value from 50 to 52.
The quantity calculated by `CalculateOrderQuantity` has changed from 50 to 53 because of factor file update.
* Adds CapacityEstimate and SymbolCapacity
The capacity estimation has been moved from
the report generator and wired directly into
Lean via the ResultHandler. In addition,
the capacity estimation strategy has changed
to account for errors in the previous iteration
of the capacity estimation.
Many many thanks to Jared for being much of the
mastermind behind this project. It would have
been harder to complete without him to bounce ideas
off of.
* Moves old tests to regression algorithms
* Adds Estimated Capacity statistic
* Removes old capacity estimation tests
Final report capacity estimation. Pushing to save state
* Fixes bugs, cleans up code and adds comments
* Adds forced sampling to Capacity Estimation
* Misc. bug fixes for daily data
* Updates capacity test cases' Estimated Strategy Capacity statistic
* Adds Capacity Estimate to all regression algorithms
* Removes Report's StrategyCapacity class and fixes bug in tests
* Adds null check in BacktestingResultHandler to fix
BacktestingTransactionHandler failing tests
* Deletes old capacity estimation classes
* Retrieve capacity estimates from backtest statistics results
instead of calculating at runtime
* Make $0.00 capacity return as "-" and Result = 0 in report
* Adds capacity to runtime statistics
* Converts capacity to number denoted by financial figures in RuntimeStats
* Addresses review: code cleanup for Capacity and adds comments to regression tests
* Update OrderListHash to use MD5 as hash instead of hash code
* Update regression algorithm OrderListHash statistic
* Use full MD5 hash as OrderListHash, update regression statistic
* Fixes failing regression tests
* Oanda default forex Market
- Use Oanda as default forex Market since it has more pairs.
- Remove FXCM data add Oanda equivalente data.
- Update unit and regression tests
* Address reviews
- Revert FXCM data removal
- Remove unrequired commented code
* Fix rebase
- Renaming `PreSelected` to `Constituents`
- Adding base `ConstituentsUniverse`
- Adding Py and C# regression algorithm
- Fixing bug in `UniverseSelection`, it wasn't removing pending to be
removed securities unless the universe selection changed
- Adding test data
- `ITimeRules` are expected to yield time date in UTC, fixing `Noon`,
`Midnight` and `Every`
- `ScheduledUniverseSelectionModel` will use UTC time zone by default
since that is the default expected time zone `ITimeRule` provides
- Adding regression test
- Adding `FreePortfolioValue` to be set after algorithm initialize based
on the `TotalPortfolioValue` and the `FreePortfolioValuePercentage`
- Updating regression tests
- Adding new regression test
- Adding check for minimum order value at `BuyingPowerModel`
- Removing `using QCAlgorithmFramework = QuantConnect.Algorithm.QCAlgorithm`
- Removing `QCAlgorithmFrameworkBridge`
- Removing `IsFrameworkAlgorithm`
- Making `EmitInsightBasedOnFill` private. Adding new
`IOrderEventProvider` exposing an `event` to which `QCAlgorithm` will
subscribe.
- `AccountType.Cash` algorithms will be allowed to manually trade and
emight insights manually or with alpha model.
Fixes a bug where we were using the security's data resolution to compute
the insight's close time. This led a case such as insight.Period == 20days
to step 20days worth of tradable minutes (assuming minute data resolution),
yielding a close time that was very far in the future.
We also add different means of specifying an insight's period/close time:
1. Specify insight period as a TimeSpan and we compute close time
2. Specify insight period and a resolution and bar count and we compute close time
3. Specify insight close time local directly and we compute the insight period
The key here is maintaining consistency between the three different approaches
which is heavily validated with the corresponding unit tests.
Edits also made to trust the insight's close time as the analysis end time in
the case where the analysis period == insight period (extra analysis period = 0).
Given the current setup (extra analysis period == 0), this guarantees that close
and analysis end times are equivalent.
Regression statistics were updated and expectedly we get many more insights that
have completed analysis, and as such, average scores have also changed.
This flag indicates whether or not the local regression test system,
via RegressionTests.AlgorithmStatisticsRegression should run a given
IRegressionAlgorithmDefinition
It's important that we keep the factor files consistent with respect to
the date that they were generated. This enables us to run the regression
algorithms in the cloud and get the same results by using the factor files
from the correct date.
A mechanical refactoring was performed to make algorithms currently used in
regression algorithms to implement IRegressionAlgorithmDefinition, which allows
algorithms to define their own expected statistics and what languages should be
run as part of regression. The type name of the C# type is used to determine the
file/model name for python. This was for simplicity, but if needed, could later be
refactored to expose more information, but for now the convention of keeping names
the same makes sense and just works easily.
The ScheduledUniverseSelectionModel wraps the new ScheduledUniverse.
ScheduledUniverse is similar to the UserDefinedUniverse we use to create
universes for dopbox/remote files w/ symbol listing. The new abstraction
that 'turns on' this no-data/scheduled based universe behavior is the
ITimeTriggeredUniverse, which exposes GetTriggerTimes which yields the
date/times your univese selection function will be called.
A regression algorithm was also added to cover the new feature.
Ronit Jain