Set default user for Dockerfiles. Includes also small migrate fixes.
<!-- CURSOR_SUMMARY -->
---
> [!NOTE]
> Defaults Dockerfile-based templates to user 'user' and workdir
'/home/user', updates CLI templates (sudo start/ready, relative Python
import), and allows template migration without a config file.
>
> - **SDKs (Dockerfile parsing)**:
> - JS (`packages/js-sdk/src/template/dockerfileParser.ts`) and Python
(`packages/python-sdk/e2b/template/dockerfile_parser.py`): after
parsing, set defaults `setUser('user')` and `setWorkdir('/home/user')`.
> - **CLI Templates**:
> - Python build scripts: switch to relative import `from .template
import template`.
> - Generated template hbs: start/ready commands now prefixed with
`sudo`; removed explicit root/workdir before start/ready.
> - **CLI Migrate**:
> - Supports migration without `e2b.toml`; uses default config values
and prints a warning instead of exiting.
> - Initializes default config when missing; success messaging adjusted.
> - **Tests**:
> - Update fixtures to reflect new defaults (`set_user('user')`,
`set_workdir('/home/user')`, `sudo` start/ready, relative imports).
> - Relax error case to succeed with warning when config is missing.
> - Comment out stacktrace tests for `fromDockerfile` in JS/Python until
fixed.
> - **Changesets**: Patch bumps for `@e2b/cli`, `@e2b/python-sdk`, and
`e2b`.
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
934dc3b23b5607f70d4a4f5b7a9413a9d04df28a. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
Changed to use commands instead of API and added auth.
<!-- CURSOR_SUMMARY -->
---
> [!NOTE]
> Introduce MCP auth by launching mcp-gateway with an access token and
exposing a token getter; replace HTTP config with command execution and
bump default MCP template to v0-1.
>
> - **SDKs**:
> - **MCP auth**:
> - Launch `mcp-gateway` via `commands.run` with `GATEWAY_ACCESS_TOKEN`
set to a generated token (JS/TS and Python, async/sync).
> - Expose token retrieval: `betaGetMcpToken()` (JS) and
`beta_get_mcp_token()` (Python) reading `/etc/mcp-gateway/.token` if
needed.
> - **Configuration flow**:
> - Replace HTTP `POST /config` setup with command-based startup; remove
retry logic (JS and Python).
> - **Defaults**:
> - Update `defaultMcpTemplate`/`default_mcp_template` to
`mcp-gateway-v0-1` (JS and Python).
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
4456a1822d87fa32110f6659c3bf9135bff71045. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
<!-- CURSOR_SUMMARY -->
> [!NOTE]
> Adds beta MCP support to JS/Python SDKs with template auto-selection,
config POST, MCP URL helpers, and codegen for MCP types/schemas.
>
> - **SDKs (Beta MCP support)**:
> - **JS SDK**:
> - Add `McpServer` types and export; extend `Sandbox.betaCreate` with
`mcp` option that auto-selects `mcp-gateway-v0`, configures MCP via POST
`/config` on port `50005` with retries, and expose `betaGetMcpUrl()`.
> - Add `wait(ms)` util; generate MCP types from `spec/mcp-server.json`;
new `generate:mcp` script and dev dep `json-schema-to-typescript`.
> - **Python SDK**:
> - Generate and export `McpServer` (TypedDict); extend sync/async
`beta_create` with `mcp` option, auto-select default MCP template, POST
MCP config with retries, and add `beta_get_mcp_url()`; define `mcp_port`
and `default_mcp_template`.
> - Makefile: add `generate-mcp` target; include
`datamodel-code-generator` in tooling; update lockfile/pyproject deps.
> - **Tooling**:
> - Add `spec/mcp-server.json` schema; update codegen Dockerfile to
install `datamodel-code-generator`.
> -
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
cf3f175d310d4c242cd2e867efd801f5c04f2099. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
---------
Co-authored-by: Jonas Scholz <Jonas.Scholz@bbscholz.de>
<!-- CURSOR_SUMMARY -->
> [!NOTE]
> Unifies Template APIs across JS/Python with PathLike support, new
copyItems, option/name tweaks, and simpler registry auth via
credentials; updates parser, exports, and tests.
>
> - **Template API (JS + Python)**
> - Add PathLike support for paths in `copy`, `remove`, `rename`,
`makeDir`, `makeSymlink`, `setWorkdir`, and `gitClone`.
> - Introduce `copyItems` and corresponding `CopyItem` typing; adjust
Dockerfile parser to use `copyItems` overload.
> - Simplify registry auth: `fromImage(baseImage, credentials)` accepts
`{username,password}`; remove `fromRegistry`; update
`fromAWSRegistry`/`fromGCPRegistry` to take credentials and set config
internally.
> - Rename options: `ignoreFilePaths` -> `fileIgnorePatterns`;
`fileContextPath` can be `PathLike`.
> - Ensure internal hashing/upload use stringified paths; minor
enum/type tweaks (e.g., `InstructionType` as string enum, `forceUpload?:
true`).
> - **Exports**
> - Export `CopyItem` from JS `index.ts` and Python `__init__.py`.
> - **Tests**
> - Update stacktrace and build tests to new method names/signatures
(e.g., registry via `fromImage` credentials, new `copyItems` tests,
optional `skipCache` param).
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
95391030550a340fe99ebaac4494867b3e3e9507. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
---------
Co-authored-by: Jakub Dobry <jakub.dobry8@gmail.com>
Disable stdin (setting it to `/dev/null` for `command.run()`, but enable
to setting it to pipe, which you can send the input via
`command.sendStdin()`
This fixes issues with tools checking for stdin and then hanging
indefinitely
<!-- CURSOR_SUMMARY -->
---
> [!NOTE]
> Disables stdin by default and introduces a new `StartRequest.stdin`
flag to opt-in to stdin piping, updating JS/Python SDKs, version gating,
and tests.
>
> - **Spec/Protobuf**:
> - Add `optional bool stdin` to `process.StartRequest` in
`spec/envd/process/process.proto` and regenerate JS/Python protos.
> - **JS SDK**:
> - Add `ENVD_COMMANDS_STDIN = '0.3.0'` and version check; error if
`stdin === false` on older envd.
> - Extend `CommandStartOpts` with `stdin` (default `false`); pass
`stdin` to `rpc.start`.
> - **Python SDK**:
> - Add `ENVD_COMMANDS_STDIN = Version("0.3.0")` and version check
mirroring JS.
> - Extend async/sync `commands.run()` with `stdin` (default `False`);
pass to `StartRequest`.
> - Update generated `process_pb2`/`.pyi` with `StartRequest.stdin`.
> - **Tests**:
> - Update send-stdin tests to run commands with `stdin:
true`/`stdin=True`.
> - **Changeset**:
> - Minor bump for `@e2b/python-sdk` and `e2b`.
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
458a15187e6eadccd43540e6b8972c4d45e1bb78. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
Introduce beta submodule with beta features - pause and resume
Update Sandbox list to also return paused sandboxes
---------
Co-authored-by: Tomas Valenta <valenta.and.thomas@gmail.com>
# Description
We can simplify typing and return only SandboxInfo in SDKs as the types
are very similar (there are some extra fields in detail, which we don't
want to expose but we need them e.g. for connect)
Several improvements and refactors to the Python SDK's sandbox
connection and configuration logic.
The main focus is on making header management more flexible, improving
API parameter handling, and simplifying class structures for better
maintainability and usability.
Also unifies doc strings
Increase the default request timeout to 60 seconds. This is the value in
the current beta, and with the merge, we want to keep it that way, to
minimize possible negative migration impact.
- Allow protobuf `4.21.0`+ (we previously allowed this, and some users
in beta require this)
- Allow protobuf `6.0.0`+ (some other users need to use the SDK with the
latest versions)
The SDK should work with both of these, but we may want to smoke test it
somehow.
---------
Co-authored-by: Jakub Novak <jakub@e2b.dev>
Some users report that JS/Python types lack a `useSignature` attribute,
which only works when `secure=true` is set for the sandbox. This change
removes the `useSignatrue` parameter and makes all upload/download URL
requests signed if `secure` was provided, making sure the function will
work for all possible cases.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Fornefeld <50748440+ben-fornefeld@users.noreply.github.com>
**Changelog**
- Adds `files.getInfo`, `files.get_info` methods to the SDKs.
- Adds tests for the new methods
- Adds documentation for the above.
**Examples**
JavaScript
```js
import { Sandbox } from '@e2b/code-interpreter'
const sandbox = await Sandbox.create()
// Create a new file
await sandbox.files.write('test_file.txt', 'Hello, world!')
// Get information about the file
const info = await sandbox.files.getInfo('test_file.txt')
console.log(info)
// {
// name: 'test_file.txt',
// type: 'file',
// path: '/home/user/test_file.txt'
// }
```
Python
```py
from e2b_code_interpreter import Sandbox
sandbox = Sandbox()
# Create a new file
sandbox.files.write('test_file', 'Hello, world!')
# Get information about the file
info = sandbox.files.get_info('test_file')
print(info)
# EntryInfo(name='test_file.txt', type=<FileType.FILE: 'file'>, path='/home/user/test_file.txt')
```
---------
Co-authored-by: Jakub Novak <jakub@e2b.dev>
# Description
The bug where extra fields in envd response caused an exception was
fixed in #738. As we're also ignoring new fields in envd (implemented in
https://github.com/e2b-dev/infra/pull/847). We now have to update the
`user-agent` header.
# Description
Fixes an issue in generating files in Docker. There has been an
incompatibility of `buf` (version `29.5`) and `protoc-gen-es` (version
`2.2.2`).
I updated `protoc-gen-es@` to `2.6.2`
Also refactored the code a little so it's easier to read
Added a CI pipeline job to check all files are properly generated
- CLI spawn, connect, and logs work with and without the client part
provided
- JavaScript and Python SDKs are no longer returning IDs with client
part
PR that allows you to pass `proxy` (of the type ProxyTypes) when calling
methods in the SDK that send requests. Also, if you pass `proxy` when
creating a sandbox, all the sandbox requests (called on the
Sandbox/AsyncSandbox instance) will automatically use the same proxy.
The PR also contains a small bugfix—adding missing passing of limits and
passing these directly instead of through transport to be able to pass
the proxy parameter properly.
This change should also be compatible with the code interpreter—it uses
the client transport, which uses the passed proxy if there is any.
Mish Ushakov